Floormaster Polyurethane Floor Paint for Durable Floors 5.0 kg

Manufactured by Paint Master

Why Choose Our Products?

Heavy-duty industrial polyurethane floor coating

Gloss film shrugs off oil & petrol

Optional silica anti-slip texture

12 workshop-ready colours

Brush roll or spray – easy white-spirit clean-up

Floormaster Polyurethane Floor Paint is a single-pack, solvent-based coating for prepared concrete, garage, workshop and warehouse floors. Choose the appropriate finish for your project and check the substrate and preparation requirements below.

The anti-slip option includes a separate silica sachet to mix into the paint before application. A textured coating does not replace cleaning, maintenance or an assessment of slip hazards.

Check primer compatibility before coating bare concrete. Compare Extreme polyurethane floor paint as a separate branded option, or browse the floor-paint range.

Suitable Substrates:

Floormaster Polyurethane Floor Paint is highly versatile and can be applied to:

Concrete and cement screeds: ideal for garages, warehouses, and storage units. Power-floated slabs should be ground or etched before priming.
Block paving and porous masonry: effective for utility spaces, service yards, and storage areas.
Timber floors: provide a washable, durable finish for wooden workshop floors.
Mild steel and prepared metal: can be applied when appropriately abraded and primed with a compatible basecoat.

Note: not recommended directly over existing solvent-based floor paints without complete removal or successful compatibility testing.

Coverage & Spread Rate:

6–8 m² per litre per coat on smooth, well-prepared concrete.
A 5L tin covers approx 15 m² with two coats.
A 20L tin covers approx 60 m² with two coats.

For the best finish and maximum lifespan, always apply two thin coats at right angles and order the full volume in one batch to ensure colour consistency.

Drying & Curing Times (@ 18 °C):

Touch dry: 4–6 hours
Recoat window: 6–8 hours
Light traffic: 24 hours
Vehicle traffic: 72 hours
Complete cure and chemical resistance: 7 days

This fast turnaround allows areas to be in light use within a day, offering full industrial performance after a week.

Storage & Thinning:

Store securely between 5 °C and 30 °C, away from heat and flame sources. Always reseal tightly between uses. Tools and rollers can be cleaned with white spirit while still wet. If thinning is required, use White Spirit or Turpentine Substitute sparingly (no more than 5%) to maintain coverage and performance.

Packaging notice:

During peak demand, tins may occasionally be supplied in plain white packaging with printed product labels. The product quality and performance remain identical.

Safety notice:

This is a solvent-based, flammable floor paint for professional use. Always apply in well-ventilated areas, avoiding sparks, heat, and flames. Wear gloves, eye protection, and a respirator if required. Prevent prolonged skin contact and inhalation of vapours. Keep children out of reach and dispose of waste responsibly. Consult the product Safety Data Sheet (SDS) for full health and safety guidance.

Note:However, please bear in mind on some occasions the packaging may arrive slightly damaged. Please do not order if you won't be satisfied with this.

Surface Preparation
Start by degreasing and vacuuming the substrate to remove dust, oil, and contaminants. Power-floated or polished slabs should be ground or etched to create a key, and moisture levels must be below 4% before coating.

Priming
Apply one full coat of Floormaster Polyurethane Floor Primer & Sealer to bare or polished concrete. Allow a minimum of 12 hours drying time before proceeding with topcoats.

Mixing
Stir the paint thoroughly for 2 minutes with a paddle mixer. For anti-slip use, slowly add the supplied silica sachet while stirring until it is thoroughly and evenly dispersed.

First Coat
Apply a thin, even coat with a roller or brush, achieving around 100 μm wet film thickness. Work systematically and avoid puddling or over-rolling.

Second Coat
After 6–8 hours, apply a cross-direction coat at right angles to the first. Two coats deliver an approximate 50 μm dry-film build, ensuring maximum protection. Do not exceed two coats in 24 hours.

CuringKeep the coated area dust-free for at least 12 hours. Allow 24 hours before light foot traffic, 72 hours before vehicle traffic, and 7 days before complete chemical resistance is achieved.

Priming
Apply one full coat of Floormaster Polyurethane Floor Primer & Sealer to bare or polished concrete. Allow a minimum of 12 hours drying time before proceeding with topcoats.

Mixing
Stir the paint thoroughly for 2 minutes with a paddle mixer. For anti-slip use, slowly add the supplied silica sachet while stirring until it is thoroughly and evenly dispersed.

First Coat
Apply a thin, even coat with a roller or brush, achieving around 100 μm wet film thickness. Work systematically and avoid puddling or over-rolling.

Curing
Keep the coated area dust-free for at least 12 hours. Allow 24 hours before light foot traffic, 72 hours before vehicle traffic, and 7 days before complete chemical resistance is achieved.

Property	Details
Components	Polyurethane-based resin
Base Type	Solvent-based
Finish	Gloss
Theoretical Coverage	6–8 m² per litre per coat
Number of Coats	2
Coating Thickness	Dependent on the application method and surface porosity
Suitable Substrates	Concrete, wood, metal
Use Case	Interior and exterior
Touch Dry Time	4–6 hours

Property	Details
Overcoatable	After 24 hours
Pot Life	Not applicable
Primer Required?	Recommended for porous surfaces
Colour Options	Multiple colour options available
Application Method	Roller or sprayer
Cleaner / Thinner	Trade Paints PU Thinner
Shelf Life	12 months (unopened)
Sizes Available	5 L, 20 L

DATA SHEETS AND PRODUCT FILES

Below are all the product files available for this coating. If you require any further information on this product, please email us at support@tradesuppliesuk.co.uk and one of our team will be happy to help.

FILES AND DATA SHEETS

MSDS - Material Safety Data Sheet

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

What surfaces can Floormaster Polyurethane Floor Paint cover?

Concrete, cement screeds, block paving, timber floors, and prepared metal in workshops, garages, and industrial areas.

Is a primer required before using Floormaster Floor Paint?

Yes – prime bare or polished concrete with Floormaster Primer & Sealer for adhesion, durability, and dust suppression.

How durable is this polyurethane floor paint under heavy traffic?

It resists tyre scuffs, forklift traffic, oils, fuels, and chemical spills in garages, warehouses, and factories.

Can this paint be used to create an anti-slip floor finish?

Yes – stir in the supplied silica additive for grip on ramps and wet areas; extra silica can be added if needed.

How long does Floormaster Floor Paint take to dry and cure?

Touch dry 4–6 h, recoatable 6–8 h, foot traffic 24 h, vehicle-ready 72 h, fully cured in 7 days at 18 °C.

How much area will a tin of Floormaster Polyurethane Paint cover?

6–8 m² per L per coat; 5L covers ~15 m² (2 coats), 20L covers ~60 m² (2 coats) on smooth concrete.

Can this floor paint be applied to power-floated concrete?

Yes – but mechanically grind or etch before priming to ensure adhesion and prevent peeling.

What colour options are available in Floormaster Floor Paint?

12 stock colours (grey, green, red, yellow, blue, white, black) + custom RAL/BS shades for 100L+ orders.

Is Floormaster Floor Paint suitable for wet rooms or tiled floors?

No – it's not recommended for wet rooms, permanently wet/standing-water areas, or tiled floors; it performs best on porous prepared surfaces like concrete and screed, as non-porous tiles and constantly wet conditions affect adhesion and durability.

Is Floormaster Floor Paint resistant to oils and chemicals?

Yes – it forms a dense protective film against oil, diesel, petrol, cleaning agents, and solvents.

How should I prepare the surface before applying the paint?

Clean thoroughly, ensure <4% moisture, remove dust/grease/old paint, and prime porous/polished surfaces.

Can Floormaster Polyurethane Paint be used outdoors?

Yes – it can also coat exterior concrete or masonry with durable, weather-resistant protection.

How does Floormaster compare to cheaper acrylic floor paints?

Unlike acrylics, it creates a solvent-based PU coating that lasts longer, resists scuffs/chemicals, and reduces maintenance.

What tools are recommended for applying this floor paint?

Roller or brush; gloss version can be thinned up to 5% with white spirit for spraying (not the anti-slip).

Is this paint suitable for garage floors with vehicle traffic?

Yes – highly recommended, resists hot-tyre pickup (>60 °C), oil leaks, and heavy vehicle use once cured.

Floormaster Polyurethane Floor Paint for Durable Floors 5.0 kg