Extreme Paints Polyurethane Floor Paint
Couldn't load pickup availability
Coverage Calculator
Extreme Paints Industrial‑Grade Polyurethane Floor Paint is a premium single‑pack, heavy‑duty coating formulated with high‑performance polyurethane resins to handle the demands of factories, warehouses and busy garages. Its high‑build film provides superior resistance to tyre plucks, impacts and abrasion while maintaining a deep gloss that repels oil, petrol and many chemicals.
The optional anti‑slip version is pre‑blended with fine silica grit, adding a textured surface that improves under‑foot safety on ramps and wet areas without sacrificing cleanability. Easier to apply than two‑part epoxies, this solvent‑borne formula levels beautifully and cures to a durable, easy‑clean surface.
Manufactured in the UK under ISO 9001 QA, every batch is viscosity‑checked to ensure consistent coverage and colour accuracy. Always in stock for rapid dispatch—ideal when large floor areas need a fast turnaround.
Suitable Substrates
Concrete, sealed or bare; well‑prepared metal; sound timber; most porous masonry. Power‑floated or polished concrete must be mechanically ground to open the surface. Self‑levelling screeds are usually non‑porous and not recommended.
Bare concrete should first receive one coat of Extreme Paints Clear Polyurethane Primer & Sealer to maximise penetration and adhesion.
Colours Available
Black • Dark Grey • Grey • Light Grey • Mid Green • Dark Green • Post Office Red • Red • JCB Yellow • Orange • Blue • White
Custom BS or RAL shades supplied on orders ≥ 100 L.
Spreading Rate (Coverage)
5–7 m² per litre per coat depending on porosity.
20 L tin ≈ 60 m² with two coats
5 L tin ≈ 15 m² with two coats
Drying Time
Touch dry 6–8 h @ 18 °C. Recoat after 6–8 h. Full mechanical strength achieved in 7 days.
Storage
Store tightly closed between 5 °C and 30 °C away from heat sources.
Thinners
White spirit or standard PU thinner. Thin sparingly (≤ 5 %) for spray.
Batch Information
Order total volume in one batch for perfect colour match.
Disclaimer: In peak demand, product may ship in a plain white tin with the correct label. Contents and quality remain identical.
Safety Disclaimer: Solvent‑based—use only with adequate ventilation. Avoid vapour inhalation and prolonged skin contact. Keep away from ignition sources. Wear gloves and respiratory protection if required. Dispose of waste responsibly. Keep out of reach of children. Consult SDS for full safety guidance.
| Property | Value |
|---|---|
| Components | 1-part single pack |
| Base | Polyurethane resin |
| Finish | High gloss (standard) • Textured gloss (anti-slip) |
| Recommended coats | 2 |
| Wet film thickness | 100 µm (≈ 50 µm DFT) |
| Coverage | 5–7 m² per L per coat |
| Touch dry | 6–8 h @ 18 °C |
| Recoat window | 6–8 h @ 18 °C |
| Full cure | 7 days |
| Property | Value |
|---|---|
| Application tools | Brush, roller, airless, HVLP (normal finish) |
| Clean-up | White spirit / PU thinner |
| Shelf life | 24 months unopened |
| Pack sizes | 5 L, 20 L |
| Colour options | 13 standard industrial colours (see list above) |
| Interior / exterior | Interior (sheltered) |
| Suitable substrates | Concrete, metal, timber, stone, well-bonded coatings |
| VOC | < 430 g /L |
| Primer required | Recommended on bare, polished or brittle concrete (Extreme Paints PU Primer & Sealer) |