Extreme Paints Skip & Container Paint: Anti-Corrosivess

Q: What surfaces can Extreme Paints Skip & Container Paint be applied to?

This paint can be applied to steel skips, shipping containers, waste bins, metal cladding, primed steel, prepared concrete, brick, and timber. For bare or rusty steel, it is essential to first apply a compatible anti-corrosive primer to ensure proper adhesion and long-term rust protection.

Q: Can I spray this paint?

Yes, the paint is suitable for airless spraying as well as brush or roller application. If the paint is too thick for your sprayer, it can be thinned with up to 15% white spirits. Always add as little as necessary to achieve proper sprayability to maintain finish quality.

Q: How many coats are recommended?

Two thin coats are recommended for the best results. Applying two coats ensures a uniform, high-gloss finish and strengthens corrosion protection. Avoid applying a single thick coat as this may result in runs or uneven drying.

Q: How long does it take to dry?

The paint is touch-dry in 6–8 hours at 18 °C. You can recoat after 6–8 hours, depending on weather conditions and film thickness. The paint will fully cure after 7 days, providing maximum hardness, chemical resistance, and long-term durability.

Q: Can it be used outdoors?

Yes, this is a weatherproof, heavy-duty industrial paint designed specifically for outdoor use. It can withstand rain, UV exposure, and daily wear, making it ideal for skips, containers, and other industrial metal equipment exposed to the elements.

Q: Is it suitable for bare rusted steel?

Yes, but for bare or heavily rusted steel surfaces, you must first apply Extreme Paints Anti-Corrosive Oxide Primer. The primer prevents further rusting and ensures that the enamel adheres properly to the metal surface.

Q: Can I clean tools with water?

No, because this is a solvent-based enamel, cleaning with water will not work. Brushes, rollers, and spray equipment should be cleaned immediately after use with white spirits to prevent paint hardening and ensure they can be reused.

Q: What colours are available?

A wide range of industrial colours is available, including Blue, Mid Green, Tile Red, Post Office Red, White, Yellow, Light Grey, Mid Grey, Dark Grey, Black, and Orange. Custom RAL or BS4800 colours can be supplied for large orders of 100 L or more to match branding or project requirements.

Q: How should I store the paint?

Store the paint in a cool, dry, frost-free area between 5 °C and 30 °C. Keep containers tightly sealed and away from heat, sparks, or open flames to prevent fire hazards. Proper storage ensures the paint maintains its consistency and shelf life.

Q: Is this paint flammable?

Yes, this is a solvent-based enamel containing flammable components. Always use in well-ventilated areas, away from heat, sparks, or open flames. Avoid inhaling fumes and use gloves or respiratory protection if necessary.

Manufactured by Extreme Paints

Why Choose Our Products?

Heavy-duty anti-corrosive solvent enamel

Resists rust impact abrasion and weather

Industrial gloss finish – sprayable or brush-applied

Easy to clean long-term durability

12 stock industrial colours fast UK dispatch

Extreme Paints Skip & Container Paint is a heavy-duty, anti-corrosive industrial enamel specially engineered for skips, shipping containers, waste bins, and other heavy steel equipment exposed to harsh environments. Formulated with long-oil polyurethane resin and high-grade rust-inhibiting pigments, this premium skip and container paint provides a durable, weatherproof oxide gloss finish that stands up to corrosion, impact, abrasion, and daily wear.

This industrial metal paint self-levels to a smooth, high-gloss surface that is easy to clean and maintain. Designed for professional and trade use, it delivers excellent adhesion over a compatible anti-corrosive primer and can be applied by brush, roller, or airless spray for rapid, even coverage. Its robust formulation makes it ideal for skips and container exteriors in construction, waste management, logistics, marine, and other high-demand settings.

Manufactured in the UK under ISO 9001 quality standards, every batch undergoes viscosity and colour checks to ensure consistent spray performance, colour match, and long-term protection.

Suitable Substrates

Extreme Paints Skip & Container Paint can be used on a wide range of prepared surfaces including:

Steel skips and waste containers
Shipping containers and metal storage units
Primed steel surfaces and metal cladding
Prepared concrete, brick, and timber (when correctly primed)

All bare or rusted steel must be properly cleaned and primed with a compatible anti-corrosive oxide primer to ensure optimal rust protection and adhesion.

Colours Available

Choose from a wide selection of industrial-grade colours to suit any project:
Blue, Mid Green, Tile Red, Post Office Red, White, Yellow, Light Grey, Mid Grey, Dark Grey, Black, Orange.
Custom RAL or BS 4800 colours are available for bulk orders of 100 L or more.

Spreading Rate (Coverage)

Approximately 6–8 m² per litre per coat on smooth, properly prepared metal surfaces.

Pack Sizes

Available in 5 L, 10 L, and 20 L containers for projects of all sizes.

Drying Time (@18 °C)

Touch dry: 6–8 hours
Recoat: after 6–8 hours
Fully cured: 7 days

Storage

Store tightly sealed between 5 °C and 30 °C in a cool, dry place away from ignition sources and direct sunlight.

Cleaner / Thinners

Thin only if spraying and the sprayer cannot handle the product unthinned.
Use standard white spirit and add up to 15% maximum, using the smallest amount required to achieve sprayability.
Clean brushes, rollers, and equipment immediately after use with white spirit.

Batch Information

For large projects, order the total required volume in a single batch to maintain colour consistency across the job.

Safety Disclaimer

This is a solvent-based industrial coating containing flammable components. Always apply in a well-ventilated area away from heat or open flames. Avoid prolonged skin contact and inhalation of vapours. Wear gloves, goggles, and respiratory protection if spraying. Store securely and dispose of waste in accordance with local regulations. Refer to the Safety Data Sheet (SDS) for full handling and safety guidance.

Extreme Paints Skip & Container Paint is designed for industrial and heavy-duty projects where long-lasting rust protection and a high-gloss finish are essential. Follow these application guidelines for the best results:

Surface Preparation
Remove all rust, grease, oil, and loose coatings using a wire brush, scraper, or mechanical grinder. Ensure the surface is clean, dry, and free from contaminants. Spot-prime all bare or rusted areas with Extreme Paints Anti-Corrosive Oxide Primer to guarantee maximum adhesion and corrosion resistance.

Mixing
Stir the paint thoroughly for at least 2 minutes using a paddle mixer to achieve a smooth, even consistency.

Application Method
Apply using a brush, roller, or airless spray system. For best durability and colour depth, apply two thin coats (approximately 50 µm dry film per coat), allowing 6–8 hours drying time between coats. Ensure even coverage and avoid heavy build-up to maintain a self-levelling finish.

Curing
The coated surface can be carefully handled after 24 hours. Full cure, chemical resistance, and stack-ready hardness are achieved after 7 days at 18 °C.

Recommended Uses

Skips and Waste Bins: Protects metal from corrosion, dents, and harsh weather exposure.
Shipping Containers: Delivers a professional, glossy finish while preventing rust on exterior steel panels.
Industrial Equipment: Ideal for heavy steel machinery and construction gear requiring long-term surface protection.
Metal Cladding and Storage Units: Maintains colour vibrancy and shields against abrasion in high-traffic areas.
Primed Concrete or Brickwork: Adds a protective enamel layer for prepared masonry surfaces when properly primed.

Extreme Paints Skip & Container Paint provides a heavy-duty, professional-grade finish that resists rust, impact, and weathering, ensuring long-term protection for metal assets in demanding industrial environments.

Property	Value
Components	Single-pack (1-part)
Base	Long-oil polyurethane resin
Finish	High-gloss oxide enamel
Recommended Coats	2
Wet Film Thickness	100 µm (≈ 50 µm DFT)
Coverage	6–8 m² per L per coat
Touch Dry	6–8 h @ 18 °C
Recoat Time	6–8 h @ 18 °C

Property	Value
Full Cure	7 days
Application Tools	Brush, roller, airless or compressor spray
Clean-up	White spirit / standard PU thinner
Shelf Life	24 months unopened
Suitable Substrates	Steel, concrete, brick, timber
VOC	< 450 g/L
Interior / Exterior	Suitable for both
Primer Required	Yes – on bare or rusted metal

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

What surfaces can Extreme Paints Skip & Container Paint be applied to?

This paint can be applied to steel skips, shipping containers, waste bins, metal cladding, primed steel, prepared concrete, brick, and timber. For bare or rusty steel, it is essential to first apply a compatible anti-corrosive primer to ensure proper adhesion and long-term rust protection.

Can I spray this paint?

Yes, the paint is suitable for airless spraying as well as brush or roller application. If the paint is too thick for your sprayer, it can be thinned with up to 15% white spirits. Always add as little as necessary to achieve proper sprayability to maintain finish quality.

How many coats are recommended?

Two thin coats are recommended for the best results. Applying two coats ensures a uniform, high-gloss finish and strengthens corrosion protection. Avoid applying a single thick coat as this may result in runs or uneven drying.

How long does it take to dry?

The paint is touch-dry in 6–8 hours at 18 °C. You can recoat after 6–8 hours, depending on weather conditions and film thickness. The paint will fully cure after 7 days, providing maximum hardness, chemical resistance, and long-term durability.

Can it be used outdoors?

Yes, this is a weatherproof, heavy-duty industrial paint designed specifically for outdoor use. It can withstand rain, UV exposure, and daily wear, making it ideal for skips, containers, and other industrial metal equipment exposed to the elements.

Is it suitable for bare rusted steel?

Yes, but for bare or heavily rusted steel surfaces, you must first apply Extreme Paints Anti-Corrosive Oxide Primer. The primer prevents further rusting and ensures that the enamel adheres properly to the metal surface.

Can I clean tools with water?

No, because this is a solvent-based enamel, cleaning with water will not work. Brushes, rollers, and spray equipment should be cleaned immediately after use with white spirits to prevent paint hardening and ensure they can be reused.

What colours are available?

A wide range of industrial colours is available, including Blue, Mid Green, Tile Red, Post Office Red, White, Yellow, Light Grey, Mid Grey, Dark Grey, Black, and Orange. Custom RAL or BS4800 colours can be supplied for large orders of 100 L or more to match branding or project requirements.

How should I store the paint?

Store the paint in a cool, dry, frost-free area between 5 °C and 30 °C. Keep containers tightly sealed and away from heat, sparks, or open flames to prevent fire hazards. Proper storage ensures the paint maintains its consistency and shelf life.

Is this paint flammable?

Yes, this is a solvent-based enamel containing flammable components. Always use in well-ventilated areas, away from heat, sparks, or open flames. Avoid inhaling fumes and use gloves or respiratory protection if necessary.

Can I apply it on concrete or brick?

Yes, it can be applied to prepared concrete and brick surfaces. Ensure the substrate is clean, dry, and free from loose material. Priming may be required on highly porous or previously painted surfaces to improve adhesion.

How durable is the finish?

The finish is highly durable, providing a glossy, industrial-grade surface that resists rust, abrasion, impact, and daily wear. When applied correctly, it protects metal surfaces for years, making it suitable for skips, containers, and other high-use equipment.

Can this paint be applied over previously painted surfaces?

Yes, provided the existing surface is sound, clean, and properly prepared. Remove loose or flaking paint, degrease, and apply primer if needed. This ensures proper adhesion and prevents peeling or blistering over time.

How should leftover paint be disposed of?

Any leftover paint should be disposed of according to local environmental regulations. Do not pour unused paint down drains or into soil. Harden small quantities for safe disposal or take them to an approved hazardous waste collection site.

Can this paint be applied in cold weather?

Application is best between 5 °C and 30 °C. Colder temperatures can extend drying times and affect curing, while very hot conditions may lead to uneven film formation. Always check the weather before starting your project.