Pattern-Imprinted Driveway Revive Kit
Why Choose Our Products?
Time-Saving Solution – No need to source separate items or plan combinations
Cost-Effective Choice – Better value than buying individual products separately
Everything you need in one kit to take your project from prep to final finish
Professionally matched products that work together for consistent results
Better value than purchasing individual products separately
The Pattern-Imprinted Driveway Revive Kit is a comprehensive surface restoration system developed to clean, stabilise, reinforce, and protect patterned concrete and other porous exterior hard surfaces. Designed for both professional contractors and competent DIY users, this multi-stage kit provides a complete workflow that restores appearance, improves surface integrity, and delivers long-term weather protection. By combining a high-strength cleaner, penetrating dustproofer, optional polyurethane reinforcement primer, decorative acrylic sealer, and professional-grade application tools, the system ensures consistent, trade-quality results across driveways, patios, and similar hardscapes.
Kit Components and Their Role
Extreme Clean Patio Cleaner
This high-strength, bleach-based cleaning solution is formulated with 14–15% sodium hypochlorite to rapidly remove black spot lichen, algae, moss, mildew, and general organic staining. It penetrates porous substrates to break down deep-rooted contamination, preparing the surface for subsequent treatment stages. Suitable for concrete, block paving, natural stone, brickwork, render, roof tiles, and similar exterior masonry, it forms the essential first step in the restoration process by ensuring a clean, contamination-free substrate.
Extreme Seal Concrete Dustproofer / Floor Primer & Sealer
This water-based acrylic penetrates porous concrete and screeds, binding loose fines and reducing surface suction. Used as a primer, it promotes reliable adhesion of subsequent coatings. When applied in two coats as a standalone treatment, it forms a breathable satin micro-film that resists dusting, light oil staining, and tyre marking while allowing vapour transmission. Its low-odour, solvent-free formulation makes it suitable for both interior and exterior use where ventilation may be limited.
Extreme Paints Clear Polyurethane Concrete Primer & Floor Sealer
This single-pack, low-viscosity polyurethane primer is designed for deeper substrate reinforcement. It penetrates porous concrete, strengthening weak or high-traffic surfaces and significantly improving inter-coat adhesion for polyurethane or solvent-borne topcoats. When applied as a two-coat sealer, it provides a satin, protective finish that enhances durability and resists oils, water, and common contaminants. It is particularly suited to areas subject to heavier use.
Extreme Seal Pattern-Imprinted Concrete & Patio Sealer
Available in both solid coloured and clear gloss finishes, this solvent-borne acrylic coating forms the final decorative and protective layer. The coloured versions provide full surface coverage to restore faded or uneven driveways, while the clear top coat enhances and deepens existing colour hardeners and textured patterns. Both options create a durable, water-repellent film resistant to tyre scuffs, de-icing salts, oil, and everyday staining. Where additional grip is required, pre-measured silica can be incorporated to produce a subtle anti-slip texture without significantly reducing gloss.
ProDec Aluminium Extension Pole (2'6"–4'6")
This lightweight aluminium extension pole provides adjustable reach for efficient application of primers and sealers across large areas. The twist-and-lock mechanism ensures secure length adjustment, improving coverage consistency while reducing the need for ladders and excessive stretching.
Coarse Grained Polyester Foam Roller
Designed for the application of fine or textured masonry coatings, this coarse foam roller ensures even distribution of primers and sealers across patterned, textured, or porous concrete surfaces. It is compatible with both water-based and solvent-borne products included within the kit.
Performance and Application Benefits
The Pattern-Imprinted Driveway Revive Kit delivers a structured, professional-grade restoration process. The cleaning stage eliminates organic growth and staining, ensuring that subsequent products bond correctly. The dustproofer stabilises the substrate and regulates absorption, improving coating performance and longevity. Where required, the polyurethane primer strengthens weaker or heavily trafficked areas, enhancing overall durability. The final acrylic sealer provides a decorative gloss finish with long-term resistance to weathering, moisture ingress, and staining.
This integrated system ensures that surfaces are not only visually restored but structurally improved and protected against ongoing environmental exposure. The inclusion of professional application tools supports efficient, consistent installation across large exterior areas.
The flexibility of the kit allows it to be adapted to substrate condition and project requirements. For example, the acrylic sealer may be applied directly over a suitably stable surface prepared with the dustproofer, or additional reinforcement may be introduced using the polyurethane primer in high-stress zones. This makes the system suitable for both domestic driveways and more demanding trade environments.
Suitable Surfaces / Limitations
The Pattern-Imprinted Driveway Revive Kit is specifically designed for pattern-imprinted or stamped concrete, exposed-aggregate slabs, decorative concrete, block paving, concrete flags, and other porous masonry surfaces. It is suitable for driveways, patios, walkways, pool surrounds, and similar exterior hardscapes.
It is not suitable for asphalt, dense non-porous screeds, polished stone, or dense granite where penetration and adhesion may be compromised. On decorative stone or exposed aggregate surfaces, testing is recommended where darkening may be undesirable. A small test patch should always be completed prior to full application to confirm compatibility and appearance.
Finish and Appearance Outcome
Once applied in accordance with recommended preparation and curing stages, the system delivers a clean, restored, and protected surface with enhanced colour depth and decorative clarity. The coloured sealer provides a uniform gloss finish that rejuvenates faded areas, while the clear option maintains and intensifies existing pattern definition. When silica is incorporated, the finish offers improved slip resistance suitable for sloped or high-traffic areas.
The final surface is water-repellent, resistant to dirt and staining, and easier to maintain, with improved long-term durability under vehicle and foot traffic.
Manufacturing and Quality Standards
All coating components within the Pattern-Imprinted Driveway Revive Kit are manufactured in the UK under ISO 9001 quality-controlled processes. Each batch is tested for consistency, viscosity, penetration, and curing performance to ensure reliable trade-grade results. The system incorporates both water-based and solvent-borne technologies selected for optimal substrate compatibility, durability, and performance across demanding exterior environments.
| Property | Value |
|---|---|
| System Type | Multi-stage concrete cleaning, priming and sealing system |
| Components | High-strength cleaner • Water-based dustproofer • Solvent-based polyurethane primer/sealer • Decorative sealer • Silica anti-slip additive |
| Base Technology | Sodium hypochlorite cleaner • Water-based acrylic dustproofer • Solvent-borne polyurethane primer • Solvent-based acrylic sealer |
| Finish | Clear or coloured gloss finish (anti-slip option available) |
| Recommended Coats | Cleaner: 1–2 applications as required • Dustproofer: 1–2 coats • Polyurethane primer: 1–2 coats • Decorative sealer: 2 coats (3 for high-wear areas) |
| Coverage | Dustproofer: approx. 5 m²/L • Polyurethane primer: applied at approx. 50 µm WFT • Sealer: thin, even coats (rate dependent on substrate porosity) |
| Touch Dry | Dustproofer: 2–4 h • Polyurethane primer: 4–6 h • Sealer: 3–5 h @ approx. 18 °C |
| Recoat Window | Dustproofer: 2–4 h • Polyurethane primer: 4–6 h • Sealer: 4–6 h |
| Full Cure | 7 days (all sealed stages) |
| Property | Value |
|---|---|
| Application Tools | Low-pressure sprayer, watering can, stiff brush, solvent-resistant roller, brush, airless spray equipment |
| Clean-up | Water (water-based stages) • White spirit or standard thinners (solvent-based stages) |
| Minimum Application Temperature | 10 °C (no frost or rain during application and curing) |
| Moisture Requirement | Substrate moisture content ≤ 4% prior to sealing |
| Traffic Resistance | Light foot traffic: 8–12 h • Vehicle traffic: 48 h |
| Suitable Substrates | Pattern-imprinted concrete, exposed aggregate concrete, porous masonry paving |
| Unsuitable Substrates | Non-porous surfaces including asphalt, dense granite and polished stone |
| Weather Resistance | Resistant to rain after minimum 6 h drying (sealer stage) |
| Chemical Resistance | General domestic and vehicular contaminants (after full cure) |
| Anti-Slip Option | Silica additive incorporated into final sealer coat |
| Intended Use | Driveways, patios, walkways and external hardscape surfaces |
| Manufacturing Standard | Manufactured in the UK to ISO 9001 quality standards |
DATA SHEETS AND PRODUCT FILES
Below are all the products and files we have on this coating. If you require any more information on this product, please email us at support@tradesuppliesuk.co.uk or call us on 07929 525648 and one of our staff members will do their best to try and provide you with the information needed.
FILES AND DATA SHEETS
No files available for this product.
Select Variant and Order
