Paintmaster Machinery Enamel 5.0 kg

Manufactured by Paintmaster

Why Choose Our Products?

Paintmaster oil-based machinery enamel

Hard-wearing gloss finish

Brush

roller or spray application

Approximately 8 m² per litre

Touch dry in around 6–8 hours in suitable conditions

Paintmaster Machinery Enamel Paint is an oil-based gloss coating for machinery, equipment and prepared metalwork. It gives a hard-wearing, easy-to-clean finish suited to industrial, agricultural and workshop projects.

Where to use it

Use on clean, dry, properly prepared machinery and metal surfaces. Paintmaster also lists wood, composites and concrete among suitable substrates. For existing paint, remove loose material and check that the remaining coating is sound before repainting.

Preparation and application

Remove dirt, oil, grease, damp and rust. Clean and prepare the surface thoroughly.
Stir the enamel well. Apply by brush, roller or spray in even coats.
Allow the first coat to dry before recoating. Work in a well-ventilated area, away from flames and sparks.

Finish and coverage

Finish: Gloss
Coverage: Approximately 8 m² per litre, depending on the surface and application.
Touch dry: Approximately 6–8 hours in dry, well-ventilated conditions.
Clean-up and thinning: White spirit.

Choose the size and colour from the options above. Colours on screens are a guide; if an exact match matters, check the shade before ordering. For application to a specialist substrate or over an existing coating, test a small area first.

Surface preparation

Clean and dry the surface. Remove oil, grease, loose paint and rust. Check adhesion on existing coatings and test a small area when the substrate or previous paint is uncertain.

Application

Stir well. Apply even coats by brush, roller or spray in a well-ventilated area. White spirit may be used for thinning as needed; follow the packaging and supplier instructions.

Drying and clean-up

In normal dry, well-ventilated conditions, allow approximately 6–8 hours for touch drying. Cooler or damp conditions can extend drying. Clean equipment promptly with white spirit.

Typical uses

Machinery, workshop equipment, agricultural equipment and prepared metalwork. Paintmaster also lists appropriately prepared wood, composites and concrete as suitable substrates.

Property	Value
Brand	Paintmaster
Product	Machinery Enamel Paint
Base	Oil-based enamel
Finish	Gloss
Approximate coverage	8 m² per litre, depending on the surface
Application	Brush, roller or spray
Touch dry	Approximately 6–8 hours in dry, well-ventilated conditions
Surface preparation	Clean, dry and free from rust, grease and loose paint
Thinning and clean-up	White spirit
Colour and size	Select from the options on this listing

DATA SHEETS AND PRODUCT FILES

Below are all the product files available for this coating. If you require any further information on this product, please email us at support@tradesuppliesuk.co.uk and one of our team will be happy to help.

FILES AND DATA SHEETS

No files available for this product.

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

What is Paintmaster Machinery Enamel?

An oil-based gloss paint for machinery and other properly prepared surfaces.

How much will it cover?

Paintmaster states approximately 8 m² per litre. Actual coverage depends on the surface and application method.

How can I apply it?

Use a brush, roller or spray equipment on a clean, dry, properly prepared surface.

How long does it take to dry?

It is normally touch dry in around 6–8 hours when conditions are dry and well ventilated. Allow longer in cool or damp conditions.

Can I paint over rust?

Remove rust and loose coating before painting. For bare or corroded metal, confirm the appropriate primer and preparation for your project.

Can I use it outdoors?

Paintmaster describes it for machinery and equipment exposed to weather. Prepare the surface thoroughly and allow it to dry in suitable conditions.

What should I use to thin it and clean tools?

Paintmaster says white spirit can be used for thinning. Clean tools with white spirit after use.

What colours are available?

Select from the colours shown in this listing. Screen colours are approximate; check the shade before ordering if a precise match is needed.