Extreme Playground Paint 20.0 kg

Extreme Playground Paint is designed for outdoor recreational surfaces across primary and secondary schools, nurseries, community play areas, sports facilities, and public parks. It is commonly specified for playground markings including hopscotch grids, number lines, alphabet trails, and games courts; MUGA court line marking for netball, basketball, and tennis; timber play equipment restoration on adventure playgrounds and outdoor learning areas; decorative zone marking for quiet areas, story circles, and sensory gardens; and pathway and access route marking in schools and recreational facilities. This versatility makes it the preferred choice for facilities managers, local authority contractors, and playground specialists who need durable, compliant surface marking that withstands heavy daily use whilst maintaining vibrant appearance and child safety standards.

Application Instructions

Surface Preparation

All surfaces must be clean, dry, and free from loose material, moss, algae, oil, grease, and existing flaking paint. For tarmac and asphalt surfaces, sweep thoroughly and remove all debris. Treat biological growth with a suitable biocidal wash and allow 7 days for complete kill before cleaning. Pressure-wash at medium pressure to remove dirt, contaminants, and loose surface material. Allow to dry completely; moisture content should be below 15% before application. For concrete surfaces, remove laitance, dust, and contaminants by mechanical sweeping or light abrading. Patch any significant cracks or surface damage with appropriate repair compound and allow to cure fully before painting.

Priming

Priming is generally not required on sound tarmac, concrete, or previously painted surfaces in good condition. On highly porous or heavily weathered substrates, or where maximum adhesion is critical, apply one coat of Extreme Multi-Surface Primer diluted 10% with clean water. Allow 2--4 hours drying time before topcoating. This step improves penetration, reduces absorbency, and enhances colour uniformity on variable surfaces.

Mixing

Stir thoroughly for at least 2 minutes using a paddle mixer or broad flat stirrer before application and regularly throughout use to maintain uniform pigment dispersion. For the anti-slip variant, ensure the silica grit additive is evenly dispersed throughout the paint before application. Do not shake, as this may introduce air bubbles. The product is supplied ready for use; do not thin unless absolutely necessary for spray application (maximum 5% clean water).

First Coat

Apply the first coat by brush, medium-nap roller, or airless spray equipment. Brush application is recommended for detailed line work, lettering, and intricate designs. Roller application is effective for larger zones and background areas. For spray application, use an airless sprayer with a 15--17 thou tip at 1,500--2,000 psi. Apply a thin, even coat across the marked area, avoiding puddling or excessive build-up. Work systematically to maintain wet edges and prevent lap marks. Allow 3--4 hours drying time between coats under normal conditions.

Second Coat

Apply the second coat using the same method, working at right angles to the first pass where practical to ensure complete coverage and vibrant colour depth. The second coat will have higher coverage (approximately 6--8 m²/L) as the substrate has been sealed by the first coat. Pay particular attention to edges and fine detail to ensure crisp, professional finish. For line marking, use masking tape to achieve sharp, clean edges.

Optional Third Coat

For maximum colour intensity on very porous substrates, or where extended durability is required on heavily trafficked areas such as MUGA court centres or playground entry zones, a third coat may be applied after the second coat has fully dried. This provides enhanced wear resistance and colour vibrancy in high-impact locations.

Curing & Reopening Times

Light foot traffic and inspection access after 12 hours. Return play area to full use after 48 hours. Complete cure and maximum durability after 7 days. Protect freshly painted surfaces from rain or standing water for a minimum of 2 hours after application. Avoid heavy equipment or vehicle traffic over painted areas for 48 hours.

Pro Tips

Schedule application during dry, stable weather with at least 2 hours of dry conditions forecast. Work during moderate temperatures (10--25 °C) with low humidity for optimal drying. Avoid application in direct, intense sunlight or on surfaces above 30 °C. Use quality masking tape and remove whilst paint is still slightly tacky for cleanest edges. For large area coverage, work in manageable sections and maintain wet edges to prevent visible joins. Apply decorative and detailed work last to avoid accidental damage during main area coating.

Clean-Up

Clean all brushes, rollers, and spray equipment immediately after use with clean water. For stubborn dried paint, use warm soapy water and a stiff brush. Flush spray lines thoroughly and store equipment clean and dry. Dispose of waste materials and contaminated cleaning water in accordance with local environmental regulations. Do not pour rinsings into drains or watercourses.