Extreme Clean Advanced Rust & Oxidation Treatment

Extreme Clean Advanced Rust & Oxidation Treatment is a fast-acting professional-strength rust remover engineered to dissolve rust stains lift oxidation marks and restore the original appearance of metal stone and hard surfaces. The advanced formulation reacts on contact with iron oxide deposits breaking down the bond between the rust and the substrate so that even deep-set staining wipes away cleanly with minimal scrubbing leaving surfaces brighter cleaner and ready for further treatment or finishing.

Unlike standard rust removers that struggle in cooler conditions this powerful formula remains fully effective down to 12 °C making it a reliable choice across the British climate for outdoor patios driveways tools and stored equipment. The fast-acting chemistry penetrates oxidation marks within minutes loosening rust staining from brickwork paving stainless steel galvanised fittings and concrete surfaces. Whether tackling rusty water run-off marks on stone slabs corroded garden tools fence panels gates or oxidised metalwork on commercial property this concentrated rust and oxidation treatment delivers consistent results where weaker domestic products fail.

Proudly Made in the UK and Biodegradable Certified this is an environmentally preferable rust stain and oxidation removal cleaner. It is a practical choice for property maintenance teams landscapers stonemasons restoration specialists facilities managers and homeowners who need to restore stained patios driveways paving walls and exterior metalwork to a clean professional finish. Use it to lift rust marks from natural stone and concrete remove oxidation from metal surfaces or treat corroded fittings tools and machinery before refurbishment without resorting to aggressive mechanical abrasion.

The application is straightforward:

Apply to a dry surface using a brush sponge or low-pressure sprayer ensuring full coverage over the rust-stained area. Allow the product to dwell for several minutes until the rust visibly breaks down and the stain begins to lift then agitate gently with a soft brush and rinse thoroughly with clean water. For heavy oxidation or deeply set staining a second application may be required to achieve a complete clean.

Suitable Surfaces:

• Natural stone paving concrete slabs and block paving with rust run-off staining

• Brickwork sandstone limestone and exterior masonry

• Stainless steel galvanised steel and powder-coated metalwork

• Garden tools hand tools machinery parts and workshop equipment

• Fencing gates railings and exterior metal fittings

• Driveways pathways and patios affected by iron staining

Not suitable for polished marble travertine highly acid-sensitive natural stones aluminium chrome or anodised finishes. Always test a small inconspicuous area first to confirm compatibility before full application.

Dilution & Coverage:

• Heavy rust staining and oxidation: use neat

• Moderate rust marks: dilute 1:3 with clean water

• Light surface staining and maintenance: dilute 1:5 to 1:10 with clean water

Working & Dwell Times (at 12 °C or above):

• Light surface staining: 2 to 5 minutes

• Moderate rust marks: 5 to 15 minutes

• Heavy oxidation and deep staining: 15 to 30 minutes (re-apply if surface dries) Do not allow the product to dry on the surface. Re-wet or rinse before drying occurs.

Storage & Clean-Up: Store between 5 and 30 °C in a cool dry frost-free area away from direct sunlight food and incompatible chemicals such as alkalis and bleach. Reseal the cap firmly between uses to preserve concentration. Rinse cloths sponges brushes and applicators with plenty of clean water immediately after use. The biodegradable formula washes away cleanly without harsh solvents. During peak demand plain containers may be supplied. Product quality and performance are identical.

Safety Notice: This product is an acidic rust and oxidation remover. Always wear chemical-resistant gloves safety goggles and protective clothing during use. Apply with adequate ventilation avoid breathing mist or fumes and keep out of reach of children and pets. Do not mix with bleach alkalis or ammonia-based products. In case of skin or eye contact rinse immediately with plenty of clean water for at least 15 minutes and seek medical advice. For full PPE guidance and hazard information consult the product Safety Data Sheet (SDS).

Note: However please bear in mind on some occasions the packaging may arrive slightly damaged. Please do not order if you won't be satisfied with this.