Extreme Anti-Slip Driveway Paint 5.0 kg

Q: What surfaces can I apply Anti-Slip Driveway Paint to?

Anti-Slip Driveway Paint is designed for concrete driveways, paving slabs, block paving, brick, masonry, render, and screed, and also performs well on garage floors, aprons, ramps, and previously painted driveways in sound condition. For best results, the surface must be clean, dry, structurally sound, and free from loose material, oil, and grease before application.

Q: Can Anti-Slip Driveway Paint be used outdoors in all weather?

It is intended for exterior use on suitable prepared surfaces. Follow the product's application conditions and curing instructions; do not apply to a damp surface or assume the coating makes ice or contamination safe.

Q: Does Anti-Slip Driveway Paint provide anti-slip protection?

The separately supplied silica additive creates a textured finish when fully mixed into the paint before application. Stir periodically to keep the grit distributed. Grip depends on preparation, wear, cleaning and conditions; the coating does not guarantee grip on ice, frost, algae or other contamination.

Q: Is Anti-Slip Driveway Paint suitable for vehicle traffic?

Yes, once fully cured the coating withstands regular domestic vehicle use, including cars, vans, and motorbikes. Allow at least 72 hours before light vehicle traffic and a full 7 days before normal use, and avoid turning the steering wheel on the spot during the first week of cure.

Q: How long before I can drive on Anti-Slip Driveway Paint?

The coating is touch dry in 1–2 hours, ready for light foot traffic after around 12 hours, and light vehicle traffic after 72 hours. Full cure, weather resistance, and maximum tyre resistance are reached at 7 days.

Q: How does Anti-Slip Driveway Paint compare to a standard driveway sealer?

This product adds a coloured, textured coating. A sealer may have a different finish or purpose. Compare the specific products and surface requirements rather than assuming a coating will outlast a sealer.

Q: What's the expected lifespan of Anti-Slip Driveway Paint in UK climate?

Service life depends on preparation, substrate condition, drainage, traffic, weather and maintenance. Inspect periodically and recoat worn areas. A fixed lifespan is not guaranteed.

Q: Is primer needed before applying Anti-Slip Driveway Paint?

A separate primer is not usually required as this product is self-priming on sound, prepared surfaces. On highly porous concrete or masonry, a first coat thinned with up to 10% clean water improves penetration and adhesion.

Q: Does Anti-Slip Driveway Paint need a primer on timber or metal sections?

Yes, timber and metal elements such as edging, ramps, gates, or drain covers should be treated with a compatible primer first to ensure long-term adhesion.

Q: How many coats of Anti-Slip Driveway Paint are recommended for best results?

Two coats are recommended for most driveways, while high-traffic areas such as shared drives, sloped entrances, and turning areas may require three coats for maximum durability and consistent anti-slip performance.

Manufactured by Extreme Paints

Why Choose Our Products?

Silica-textured finish for driveways and parking areas

Weatherproof and UV stable so colours resist fading

Self priming on concrete and block paving

Tough enough for regular foot and vehicle traffic

Manufactured in the UK

Extreme Anti-Slip Driveway Paint is a water-based acrylic coating for prepared concrete and block-paved driveways. It provides colour and a textured finish when used on a compatible, correctly prepared surface.

Each pack includes base paint and a separate silica anti-slip additive. Mix the complete supplied additive into the paint before application and stir periodically to keep it evenly distributed.

Check the listed substrates, coverage and curing instructions below. Keep the surface clean and maintained; a textured coating does not guarantee grip on ice, frost, algae or other contamination.

Important: Smooth Surface Preparation

Do not apply directly to smooth, polished or sealed surfaces without suitable preparation. Smooth surfaces must be mechanically abraded to provide a key before painting. Use a suitable primer where required, ensuring it is compatible with both the surface and this water-based acrylic paint. A primer does not replace the mechanical preparation required for polished surfaces. The surface must be clean, dry and free from dust, grease and loose material. Always test adhesion on a small area before coating the whole driveway.

Suitable Surfaces

Concrete driveways, hardstandings and poured vehicle areas
Paving slabs, flagstones and pre-cast concrete pavers
Brick, block paving and masonry driveways
Rendered and screeded drive surfaces
Garage floors, aprons, ramps and sloped access routes
Previously painted driveways in sound, stable condition
Interior and exterior vehicle and pedestrian areas

Note: Not recommended for self-levelling screeds, natural stone with heavily protruding aggregate, or polished surfaces without mechanical preparation first. Timber and metal sections benefit from a compatible primer before coating. Always trial a small, out-of-the-way area first — substrate porosity, surface condition and existing coatings all affect adhesion and final appearance.

Coverage & Spread Rate

6–8 m² per litre per coat, depending on porosity and surface texture
5 L tin covers roughly 15–20 m² with two coats
10 L tin covers roughly 30–40 m² with two coats
20 L tin covers up to 65 m² with two coats
1000 L IBC covers up to 3,250 m² with two coats — suited to estates, car parks and large commercial contracts

Rough, worn or highly porous driveways will draw in more product. Avoid heavy over-application, as this can affect texture consistency and slow drying.

Drying & Curing Times (@ 18 °C)

Touch dry: 1–2 hours
Recoat: 2–4 hours
Light foot traffic: 12 hours
Normal pedestrian use: 24–48 hours
Light vehicle traffic: 72 hours
Full cure and weather resistance: 7 days

Cold, damp or humid conditions will extend these times. Do not apply outdoors if rain is forecast within 2 hours. Avoid sharp steering or turning the wheel on the spot during the first week of cure.

Storage & Clean-Up

Store sealed containers between 5–30 °C, dry and frost-free
Before application, add the complete supplied anti-slip additive to the base paint and mix thoroughly until evenly distributed
Over-thinning reduces film build and weakens slip resistance
Reseal firmly between uses to prevent skinning
For 1000 L IBC orders, keep the tank level and agitate thoroughly before dispensing so pigment and aggregate stay evenly distributed
Wash tools with clean water straight after use
Dispose of waste in line with local regulations

Finish & Appearance

Dries to a durable textured satin finish that maximises grip while keeping a neat, even appearance across the full drive. The anti-slip profile is distributed consistently so there are no smooth patches or heavy build-up at edges. Higher-contrast colours work well for marking parking bays, drive edges, ramps and changes in level where visibility supports safety.

Safety Notice

A water-based coating with low hazard during application. Wear gloves and eye protection, and ventilate well when working indoors. Avoid eye contact and prolonged skin exposure. Keep children and pets away until fully cured. Not for ingestion. Consult the Safety Data Sheet (SDS) for full guidance.

Additional Notes

Supplied in 5 L, 10 L and 20 L tins plus 1000 L IBC tanks, covering everything from a single domestic drive to full-site safety upgrades. For consistent colour across large areas, order all material from one batch. During busy periods product may arrive in plain or trade-labelled packaging, with no change to performance or specification. Packaging can occasionally pick up minor damage in transit — please do not order if that would be unsatisfactory.

Where It's Used

Extreme Anti-Slip Driveway Paint is used wherever grip on a drive or hardstanding matters:

Residential driveways, garage aprons and front entrance routes
Care homes, sheltered housing and accessible parking areas
Schools, colleges, hospitals and public institutions
Car parks, forecourts and delivery yards
Warehouses, factories and industrial site access routes
Commercial premises, retail approaches and communal parking
Sloped drives, shaded entrances and routes prone to algae

Suitable for both indoor and outdoor use, performing reliably under regular foot and vehicle traffic and changeable weather.

Surface Preparation

Make sure the driveway is clean, dry and free from dust, grease, oil, moss, algae and any loose material. Sweep or vacuum thoroughly. Degrease oil and fuel stains with a suitable driveway degreaser and rinse well — any residue left behind will prevent adhesion. For exterior drives, pressure wash where needed and allow the surface to dry fully — treat moss and algae with a suitable remover first, as growth left in place will lift the coating. Scrape or sand away flaking paint or chalking layers and feather the edges smooth. Fill cracks and spalled sections with a compatible repair mortar and let repairs cure before painting.

Priming

No separate primer is normally required on sound, well-prepared driveways. On highly porous concrete, masonry or screed, apply a diluted first coat using up to 10% clean water to help penetration and adhesion, then allow it to dry fully. Timber and metal elements such as edging, gates and drain covers should be primed with a compatible product.

Mixing

Pour the complete separately supplied anti-slip additive into the base paint. Mix for at least 2 minutes with a paddle mixer or broad flat stirrer until the silica grit is evenly distributed. Stir occasionally during application to keep the aggregate suspended. Do not over-thin.

First Coat

Apply with a brush or medium-nap roller, spreading evenly across the drive without heavy build-up. Use brush or roller for the grit-containing coating; obtain manufacturer confirmation before using any spray method. Work in the direction of the drive and cut in edges, borders and drain surrounds neatly with a brush. Allow 2–4 hours before recoating.

Second Coat

Apply the second coat at right angles to the first for uniform coverage and consistent texture. Work methodically, checking for thin or missed areas as you go. This coat locks in the grit and builds the durability the driveway needs for long-term foot and vehicle traffic.

Optional Third Coat

On heavily used areas — shared drives, sloped entrances, turning zones and shaded sections that stay damp — a third coat after the second has fully dried gives extra film build, longer service life and stronger grip under tyre.

Curing & Reopening Times

Light foot traffic after 12 hours
Normal pedestrian use after 24–48 hours, depending on conditions
Light vehicle traffic after 72 hours
Full cure, weather resistance and maximum tyre resistance after 7 days

Keep the driveway clear of heavy rain, standing water and aggressive cleaning for the first 48 hours after the final coat. Avoid parking in the same spot for prolonged periods and never turn the steering wheel on the spot during the first week of cure.

Pro Tips

Apply in dry conditions between 10–25 °C.
Avoid extreme heat, direct intense sun and high humidity.
Never coat a damp drive, or one where rain is due within 2 hours.
Mask edges, borders, drain covers and lawn lines — peel the tape while the coating is still slightly tacky for a crisp finish.
Work in manageable sections to keep a wet edge and avoid lap marks.
On large drives, plan your exit so you aren't painting yourself into a corner.
A contrasting colour on parking bays, ramps and level changes improves visibility and clear identification of level changes.

Clean-Up

Wash brushes, rollers and spray equipment with clean water immediately after use; warm soapy water will shift partially dried residue. Reseal tins firmly to prevent skinning. Dispose of waste and empty containers responsibly and never pour residues into drains or watercourses.

Property	Value
Components	2-part — base paint + anti-slip additive
Base	Water-based acrylic
Finish	Textured satin (anti-slip with silica grit)
Recommended coats	2 standard • 3 for high-traffic drives and ramps
Wet film thickness	≈ 125 µm (≈ 50 µm DFT)
Coverage	6–8 m² / L / coat
Touch dry	1–2 h @ 18 °C
Recoat window	2–4 h
Full cure	7 days • light vehicle traffic after 72 h

Property	Value
Application tools	Brush or medium-nap roller; obtain manufacturer confirmation for any spray method with silica grit
Clean-up	Clean water
Shelf life	12 months unopened
Pack sizes	5 L, 10 L, 20 L, 1000 L IBC
Interior / exterior	Interior and exterior driveways, parking areas and garage floors
UV inhibitors	Yes (UV-stable pigmentation)
VOC	< 100 g/L (low odour, water-based)
Primer required	Not generally required; dilute first coat (10% water) on porous concrete

DATA SHEETS AND PRODUCT FILES

Below are all the product files available for this coating. If you require any further information on this product, please email us at support@tradesuppliesuk.co.uk and one of our team will be happy to help.

FILES AND DATA SHEETS

MSDS - Material Safety Data Sheet

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

What surfaces can I apply Anti-Slip Driveway Paint to?

Anti-Slip Driveway Paint is designed for concrete driveways, paving slabs, block paving, brick, masonry, render, and screed, and also performs well on garage floors, aprons, ramps, and previously painted driveways in sound condition. For best results, the surface must be clean, dry, structurally sound, and free from loose material, oil, and grease before application.

Can Anti-Slip Driveway Paint be used outdoors in all weather?

It is intended for exterior use on suitable prepared surfaces. Follow the product's application conditions and curing instructions; do not apply to a damp surface or assume the coating makes ice or contamination safe.

Does Anti-Slip Driveway Paint provide anti-slip protection?

The separately supplied silica additive creates a textured finish when fully mixed into the paint before application. Stir periodically to keep the grit distributed. Grip depends on preparation, wear, cleaning and conditions; the coating does not guarantee grip on ice, frost, algae or other contamination.

Is Anti-Slip Driveway Paint suitable for vehicle traffic?

Yes, once fully cured the coating withstands regular domestic vehicle use, including cars, vans, and motorbikes. Allow at least 72 hours before light vehicle traffic and a full 7 days before normal use, and avoid turning the steering wheel on the spot during the first week of cure.

How long before I can drive on Anti-Slip Driveway Paint?

The coating is touch dry in 1–2 hours, ready for light foot traffic after around 12 hours, and light vehicle traffic after 72 hours. Full cure, weather resistance, and maximum tyre resistance are reached at 7 days.

How does Anti-Slip Driveway Paint compare to a standard driveway sealer?

This product adds a coloured, textured coating. A sealer may have a different finish or purpose. Compare the specific products and surface requirements rather than assuming a coating will outlast a sealer.

What's the expected lifespan of Anti-Slip Driveway Paint in UK climate?

Service life depends on preparation, substrate condition, drainage, traffic, weather and maintenance. Inspect periodically and recoat worn areas. A fixed lifespan is not guaranteed.

Is primer needed before applying Anti-Slip Driveway Paint?

A separate primer is not usually required as this product is self-priming on sound, prepared surfaces. On highly porous concrete or masonry, a first coat thinned with up to 10% clean water improves penetration and adhesion.

Does Anti-Slip Driveway Paint need a primer on timber or metal sections?

Yes, timber and metal elements such as edging, ramps, gates, or drain covers should be treated with a compatible primer first to ensure long-term adhesion.

How many coats of Anti-Slip Driveway Paint are recommended for best results?

Two coats are recommended for most driveways, while high-traffic areas such as shared drives, sloped entrances, and turning areas may require three coats for maximum durability and consistent anti-slip performance.

Can Anti-Slip Driveway Paint be sprayed for faster application?

Use a brush or suitable roller for the grit-containing coating. Do not assume a standard spray setup is suitable for silica aggregate; obtain manufacturer confirmation of any spray method before use.

How do I ensure a uniform colour with Anti-Slip Driveway Paint on large drives?

Mix all tins before application to avoid colour variation, maintain a wet edge while working, and apply in manageable sections to prevent lap marks. For large areas, order all material from a single batch.

Can I apply Anti-Slip Driveway Paint over oil stains?

Oil and grease must be fully degreased and washed off before painting, as any residue will prevent proper adhesion. Treat stubborn stains with a dedicated driveway degreaser, rinse thoroughly, and allow the surface to dry completely before coating.

How should I clean tools after using Anti-Slip Driveway Paint?

Clean brushes, rollers, and equipment with clean water immediately after use, as this is a water-based product. Dried residue may require warm soapy water or specialist cleaning solutions.

How much coverage can I expect per litre of Anti-Slip Driveway Paint?

Coverage is approximately 6–8 m² per litre per coat, depending on surface porosity and profile. Rough, worn, or heavily porous driveways will require more product.

How much does a 5L or 20L tin of Anti-Slip Driveway Paint cover?

A 5L tin covers approximately 15–20 m² with two coats, a 10L tin around 30–40 m², and a 20L tin up to 65 m². A 1000L IBC tank covers up to 3,250 m² with two coats, suited to car parks and large commercial sites.

Will Anti-Slip Driveway Paint stop moss and algae returning?

The coating gives moss and algae far less to grip onto and makes routine cleaning much easier, but no coating prevents growth permanently. Regular sweeping and occasional washing will keep grip and appearance at their best.

How long before I can walk on Anti-Slip Driveway Paint?

The coating is touch dry in 1–2 hours, ready for light foot traffic after around 12 hours, and normal pedestrian use after 24–48 hours, with full cure and weather resistance at 7 days.

Is Anti-Slip Driveway Paint pet-safe once dry?

It is a water-based coating for its listed uses. Low odour does not remove handling precautions. Follow the label and safety sheet, provide ventilation and use the specified protective equipment. Keep children and pets away during application and curing.

Is Anti-Slip Driveway Paint low-odour and environmentally safe?

Yes, this is a water-based, low-VOC coating with minimal odour, suitable for residential use and for occupied sites such as schools, care homes, and commercial premises.

Can Anti-Slip Driveway Paint be used on sloped or shared driveways?

Yes, it is well suited to sloped drives, shared access routes, ramps, and garage aprons, where a contrasting colour on edges and parking bays further improves visibility and safety.