Extreme Anti-Slip Balcony Paint 20.0 kg

Q: What surfaces can I apply Extreme Anti-Slip Balcony Paint to?

Extreme Anti-Slip Balcony Paint is designed for concrete balconies, terraces, screeded surfaces, masonry render, communal walkways, and roof terraces. It also adheres well to previously painted balcony surfaces in sound condition. The substrate must be clean, dry, and structurally sound before application. It is not recommended for asphalt, self-levelling screeds, or natural stone with protruding aggregate.

Q: Does Extreme Anti-Slip Balcony Paint provide reliable slip resistance?

Yes, this coating contains evenly distributed silica grit aggregates that create a textured, high-grip surface once cured. It is ideal for balconies and terraces exposed to rain, condensation, and damp conditions, maintaining strong underfoot grip even when wet.

Q: Can Extreme Anti-Slip Balcony Paint be used outdoors in all UK weather?

Yes, it is fully UV-stable and weather resistant, formulated to withstand rain, frost, and prolonged sun exposure without cracking, peeling, or fading. For best results, apply in dry conditions between 10 °C and 25 °C and avoid rainfall for at least 2 hours after application.

Q: How many coats of Extreme Anti-Slip Balcony Paint are recommended?

Two coats are recommended for most balcony surfaces, applied at right angles to each other for full coverage and consistent anti-slip texture. High-traffic communal walkways or heavily exposed roof terraces may benefit from a third coat for maximum durability and grip.

Q: Is primer needed before applying Extreme Anti-Slip Balcony Paint?

A separate primer is not generally required on sound, prepared surfaces. On highly porous concrete or screeded substrates, apply a diluted first coat with up to 10% clean water to improve adhesion and penetration before applying full-strength coats.

Q: How much area does one tin of Extreme Anti-Slip Balcony Paint cover?

Coverage is approximately 6–8 m² per litre per coat. A 5 L tin covers around 15–20 m² with two coats, a 10 L tin covers approximately 30–40 m², a 20 L tin covers up to 65 m², and a 1000 L IBC tank covers up to 3,250 m² — ideal for large multi-unit residential and commercial projects.

Q: How long does Extreme Anti-Slip Balcony Paint take to dry and cure?

At around 18 °C, it is touch dry in 1–2 hours, ready for recoating in 2–4 hours, safe for light foot traffic after 12 hours, ready for normal balcony use after 24–48 hours, with full cure and weather resistance achieved in seven days.

Q: Is Extreme Anti-Slip Balcony Paint low-odour and safe for occupied buildings?

Yes, it is a water-based acrylic coating with low odour and low VOC content, making it a safe alternative to solvent-based products. It is ideal for use in occupied apartments, hotels, offices, and residential complexes without causing disruption to residents during refurbishment works.

Manufactured by Extreme Paints

Why Choose Our Products?

High grip anti slip coating for balconies and walkways.

Durable finish resists foot traffic and weather exposure.

Improves safety on wet balcony floors and terraces.

Manufactured in the UK.

Extreme Anti-Slip Balcony Paint is a high-performance, water-based acrylic coating engineered to make balconies, terraces and raised walkways safer underfoot. A textured silica-grit finish delivers reliable grip in rain, frost and condensation — exactly where smooth balcony surfaces become dangerously slippery — while the tough, flexible film protects the substrate from water, weather and everyday wear.

Because it's water-based, it's low-odour, low-VOC and cleans up with water, making it the practical choice for occupied apartments, hotels, offices and residential blocks where solvent fumes and long downtime aren't an option. It dries fast (touch-dry in 2–4 hours), so a balcony can be prepped, coated and back in use quickly, and the UV-stable pigments keep colours looking sharp season after season without cracking, peeling or fading.

Available in 14 colours — Charcoal, Mid Grey, Light Grey, Brown, Sandstone, Terracotta, Black, Red, White, Mid Green, Dark Green, Light Blue, Mid Blue and Dark Blue — it's a smart upgrade for both private balconies and the communal walkways and roof terraces that landlords and building managers are responsible for keeping safe.

Suitable substrates

Concrete & screed: balconies, terraces and roof terraces
Masonry render and prepared mineral surfaces
Communal walkways and access decks
Previously painted surfaces in sound, well-adhered condition

Not recommended for asphalt, self-levelling screeds, or natural stone with protruding aggregate. Always test a small, inconspicuous area on unfamiliar surfaces first.

Coverage & spread rate

6–8 m² per litre per coat, depending on surface porosity
5 L ≈ 15–20 m² (two coats)
10 L ≈ 30–40 m² (two coats)
20 L ≈ up to 65 m² (two coats)
1000 L IBC ≈ up to 3,250 m² (two coats) — ideal for multi-unit residential and commercial projects

Apply two thin coats at right angles for a uniform finish and consistent anti-slip texture.

Drying & curing times (@ 18 °C)

Touch dry: 2–4 hours
Recoat: 2–4 hours
Light foot traffic: ~8 hours
Full use: 24 hours
Full cure & weather resistance: 7 days

Cool, damp or shaded conditions extend these times. Protect fresh coatings from rain for at least 6 hours after application.

Storage & clean-up

Store between 5 °C and 30 °C, frost-free (water-based coatings must not freeze). Reseal tins firmly between uses. Clean brushes, rollers and equipment with warm soapy water while the paint is still wet — no harsh solvents needed.

Safety notice

This is a low-VOC (< 100 g/L), water-based, low-odour coating. Apply with adequate ventilation, avoid skin and eye contact, and keep children and pets off the surface until fully cured. For full PPE and handling guidance, see the product Safety Data Sheet (SDS).

Note: occasionally packaging may arrive slightly damaged. Please don't order if this won't satisfy you.

Surface preparation
The surface must be clean, dry and structurally sound. Remove all dirt, grease, algae, moss and any loose or flaking coatings. Treat biological growth with a suitable biocidal wash and allow it to work before rinsing. On concrete and screed, make sure the surface is fully cured, then remove laitance, dust and contaminants by light mechanical abrading or sweeping; fill and repair any cracks and let repairs cure fully. Moisture content should be below 15% before application. Lightly key smooth, sealed or previously painted surfaces so the paint can grip.

Mixing
Stir thoroughly with a paddle mixer for at least 2 minutes until fully uniform, and stir again during use to keep the texture even. For the anti-slip finish, make sure the silica grit is evenly dispersed throughout the paint before application. Do not shake, as this introduces air bubbles. The product is ready to use — thin only if necessary for spray application (maximum 5% clean water).

First coat
Apply a thin, even coat using a brush or medium-nap roller. Cut in the edges first, then work the main area, keeping a wet edge to avoid lap marks and taking care to avoid puddling in low spots.

Second coat
After 2–4 hours at 18 °C, apply a second thin coat at right angles to the first pass. This ensures complete coverage, consistent colour and a uniform anti-slip texture.

Optional third coat
For high-traffic communal walkways or heavily exposed roof terraces, a third coat can be applied once the second has fully dried, for extra durability and grip in the busiest areas.

Curing
Protect freshly painted surfaces from rain or moisture for a minimum of 6 hours. Allow 8 hours before light foot traffic, 24 hours before normal balcony use, and 7 days before the coating reaches full cure and weather resistance.

Clean-up
Clean all brushes, rollers and equipment immediately after use with warm soapy water while the paint is still wet — no harsh solvents needed. Dispose of waste and rinse water per local environmental regulations; never pour into drains or watercourses.

Property	Value
Components	1-part ready-to-use
Base	Water-based acrylic
Finish	Textured satin (anti-slip with silica grit)
Recommended coats	2 standard • 3 for high-traffic balconies
Wet film thickness	≈ 125 µm (≈ 50 µm DFT)
Coverage	6–8 m² / L / coat
Touch dry	1–2 h @ 18 °C
Recoat window	2–4 h
Full cure	7 days

Property	Value
Application tools	Brush, medium-nap roller, spray (max 5% water)
Clean-up	Clean water
Shelf life	12 months unopened
Pack sizes	5 L, 10 L, 20 L, 1000 L IBC
Interior / exterior	Exterior balconies and terraces
UV inhibitors	Yes (UV-stable pigmentation)
VOC	< 100 g/L (low odour, water-based)
Primer required	Not generally required; dilute first coat (10% water) on porous concrete

DATA SHEETS AND PRODUCT FILES

Below are all the products and files we have on this coating. If you require any more information on this product, please email us at support@tradesuppliesuk.co.uk or call us on 07929 525648 and one of our staff members will do their best to try and provide you with the information needed.

FILES AND DATA SHEETS

MSDS - Material Safety Data Sheet

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

What surfaces can I apply Extreme Anti-Slip Balcony Paint to?

Extreme Anti-Slip Balcony Paint is designed for concrete balconies, terraces, screeded surfaces, masonry render, communal walkways, and roof terraces. It also adheres well to previously painted balcony surfaces in sound condition. The substrate must be clean, dry, and structurally sound before application. It is not recommended for asphalt, self-levelling screeds, or natural stone with protruding aggregate.

Does Extreme Anti-Slip Balcony Paint provide reliable slip resistance?

Yes, this coating contains evenly distributed silica grit aggregates that create a textured, high-grip surface once cured. It is ideal for balconies and terraces exposed to rain, condensation, and damp conditions, maintaining strong underfoot grip even when wet.

Can Extreme Anti-Slip Balcony Paint be used outdoors in all UK weather?

Yes, it is fully UV-stable and weather resistant, formulated to withstand rain, frost, and prolonged sun exposure without cracking, peeling, or fading. For best results, apply in dry conditions between 10 °C and 25 °C and avoid rainfall for at least 2 hours after application.

How many coats of Extreme Anti-Slip Balcony Paint are recommended?

Two coats are recommended for most balcony surfaces, applied at right angles to each other for full coverage and consistent anti-slip texture. High-traffic communal walkways or heavily exposed roof terraces may benefit from a third coat for maximum durability and grip.

Is primer needed before applying Extreme Anti-Slip Balcony Paint?

A separate primer is not generally required on sound, prepared surfaces. On highly porous concrete or screeded substrates, apply a diluted first coat with up to 10% clean water to improve adhesion and penetration before applying full-strength coats.

How much area does one tin of Extreme Anti-Slip Balcony Paint cover?

Coverage is approximately 6–8 m² per litre per coat. A 5 L tin covers around 15–20 m² with two coats, a 10 L tin covers approximately 30–40 m², a 20 L tin covers up to 65 m², and a 1000 L IBC tank covers up to 3,250 m² — ideal for large multi-unit residential and commercial projects.

How long does Extreme Anti-Slip Balcony Paint take to dry and cure?

At around 18 °C, it is touch dry in 1–2 hours, ready for recoating in 2–4 hours, safe for light foot traffic after 12 hours, ready for normal balcony use after 24–48 hours, with full cure and weather resistance achieved in seven days.

Is Extreme Anti-Slip Balcony Paint low-odour and safe for occupied buildings?

Yes, it is a water-based acrylic coating with low odour and low VOC content, making it a safe alternative to solvent-based products. It is ideal for use in occupied apartments, hotels, offices, and residential complexes without causing disruption to residents during refurbishment works.

Extreme Anti-Slip Balcony Paint 20.0 kg