Paintmaster Skip & Container Paint – Anti Corrosive

Q: Will Paintmaster Skip & Container Paint stop existing rust?

It prevents further rusting, but heavy corrosion must be wire-brushed and spot-primed with anti-corrosive oxide primer before painting.

Q: Can I spray Paintmaster skip paint straight from the tin?

Yes, usually without thinning. If necessary, thin with up to 15% white spirit for smoother spray application.

Q: Does this industrial enamel need a topcoat?

No. Two coats provide complete colour, gloss, and rust protection.

Q: Is a clearcoat needed for UV resistance?

No, the UV-stable gloss finish resists fading in outdoor conditions.

Q: How long before skips can be stacked after painting?

Wait at least 48 hours for handling, and 7 days for full mechanical hardness and impact resistance.

Q: Can I use this paint on galvanised metal skips or containers?

Yes, but surface abrasion and etch priming are recommended prior to application.

Q: Will the gloss fade outdoors over time?

Gloss retention is excellent, though gradual sheen reduction may occur after prolonged exposure.

Q: What nozzle size is best for spray application?

Use a 0.017–0.019" tip at 2,500 psi for even coverage and minimal overspray.

Q: Is this paint suitable for wooden skip lids?

Yes, dry timber should be primed with an alkyd-compatible wood primer before application.

Q: How should leftover solvent-based paint be disposed of?

Collect in sealed containers and dispose of at authorized hazardous waste facilities.

Manufactured by Extreme Paints

Why Choose Our Products?

Heavy-duty anti-corrosive solvent-based enamel

Excellent rust abrasion and impact resistance

Smooth high-gloss industrial finish

Suitable for spray brush or roller application

12 popular industrial colours with quick UK dispatch

Paintmaster Skip & Container Paint is a premium anti-corrosive industrial enamel designed specifically for protecting steel skips, metal waste bins, shipping containers, and heavy-duty equipment. Formulated with long-oil alkyd resins and rust-inhibiting pigments, it creates a tough, weatherproof oxide gloss coating that guards against corrosion, chipping, and daily wear.

This enamel self-levels to a high-gloss finish that’s easy to clean and maintain. Compatible with brush, roller, or airless spray application, it bonds firmly over a suitable anti-corrosive primer, ensuring maximum rust protection and durability. Perfect for use in construction, waste management, logistics, and marine sectors.

Manufactured in the UK under ISO 9001 standards, every batch is quality-checked for consistent viscosity, sprayability, and colour fidelity.

Suitable Substrates

Steel skips, metal containers, waste bins, metal cladding, primed steel, concrete, brick, timber. Bare or rusty steel requires priming with a compatible anti-corrosive oxide primer for optimal protection.

Colours Available

Blue • Mid Green • Tile Red • Post Office Red • White • Yellow • Light Grey • Mid Grey • Dark Grey • Black • Orange
Custom RAL or BS4800 shades available on orders of 100 L or more.

Coverage

6–8 m² per litre per coat on smooth metal surfaces.

Pack Sizes

5 L, 10 L, 20 L

Drying Time

Touch dry: 6–8 hours at 18 °C
Recoat: after 6–8 hours
Fully cured: 7 days

Storage

Keep sealed tightly between 5 °C and 30 °C. Store away from ignition sources.

Thinners / Clean-up

Thin with up to 15% white spirit for spraying. Clean tools immediately with white spirit.

Batch Information

Order total quantity in a single batch for consistent colour match.

Safety Disclaimer

Solvent-based paint with flammable components. Use in well-ventilated areas. Avoid skin contact and inhalation. Use protective gloves and respirators if necessary. Store securely. Dispose of waste responsibly. Refer to Safety Data Sheet (SDS).

Surface Preparation:
Remove rust, grease, and loose coatings. Ensure surface is clean and dry. Spot-prime bare metal with Paintmaster Anti-Corrosive Oxide Primer.

Mixing:
Stir thoroughly for 2 minutes with a paddle mixer before use.

Application:
Apply by brush, roller, or airless spray. Two thin coats are recommended (approx. 50 µm dry film thickness per coat), allowing 6–8 hours between coats.

Curing:
Handle after 24 hours. Full mechanical cure after 7 days at 18 °C.

Property	Value
Components	Single-pack (1-part)
Base	Long-oil alkyd resin
Finish	High-gloss oxide enamel
Recommended Coats	2
Wet Film Thickness	100 µm (≈ 50 µm DFT)
Coverage	6–8 m² per litre per coat
Touch Dry	6–8 h @ 18 °C
Recoat Time	6–8 h @ 18 °C
Full Cure	7 days

Property	Value
Application Tools	Brush, roller, airless/compressor spray
Clean-up	White spirit / PU thinner
Shelf Life	24 months unopened
Suitable Substrates	Steel, concrete, brick, timber
VOC	< 450 g/L
Interior/Exterior	Suitable for both
Primer Required	Yes – on bare or rusted metal

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

Will Paintmaster Skip & Container Paint stop existing rust?

It prevents further rusting, but heavy corrosion must be wire-brushed and spot-primed with anti-corrosive oxide primer before painting.

Can I spray Paintmaster skip paint straight from the tin?

Yes, usually without thinning. If necessary, thin with up to 15% white spirit for smoother spray application.

Does this industrial enamel need a topcoat?

No. Two coats provide complete colour, gloss, and rust protection.

Is a clearcoat needed for UV resistance?

No, the UV-stable gloss finish resists fading in outdoor conditions.

How long before skips can be stacked after painting?

Wait at least 48 hours for handling, and 7 days for full mechanical hardness and impact resistance.

Can I use this paint on galvanised metal skips or containers?

Yes, but surface abrasion and etch priming are recommended prior to application.

Will the gloss fade outdoors over time?

Gloss retention is excellent, though gradual sheen reduction may occur after prolonged exposure.

What nozzle size is best for spray application?

Use a 0.017–0.019" tip at 2,500 psi for even coverage and minimal overspray.

Is this paint suitable for wooden skip lids?

Yes, dry timber should be primed with an alkyd-compatible wood primer before application.

How should leftover solvent-based paint be disposed of?

Collect in sealed containers and dispose of at authorized hazardous waste facilities.

Does cold weather affect drying times?

Yes, curing is slower in low temperatures and high humidity. Ideal application range is 10–25 °C.

Can the colour be adjusted on-site?

Minor adjustments are possible with universal alkyd-compatible tints; factory tinting is recommended for best colour accuracy.

Will Paintmaster paint adhere to previously painted surfaces?

Yes, if the existing coating is sound and cleaned properly. Sand glossy surfaces prior to recoating.

What is the dry film thickness of one coat?

Approximately 50 µm dry film thickness per roller-applied coat; avoid excessive buildup.

How do I maintain painted skips and containers?

Regularly wash with mild detergent and touch up any chips promptly with the same Paintmaster enamel to prevent rust.