Vintage Varnish Clear Polyurethane Varnish – Interior Gloss 20.0 kg

Q: Does the oil-based satinwood paint yellow over time?

All alkyd enamels amber slightly; Magnolia camouflages this best. Regular daylight slows the yellowing of the satinwood finish.

Q: Can I apply oil-based satinwood paint over a water-based undercoat?

Yes—ensure the water-based undercoat is fully cured (24 h) and lightly sanded to create a proper key for the satinwood paint.

Q: What is the minimum temperature for applying satinwood paint?

10 °C; cooler temperatures slow the cure of the durable satinwood paint and increase the risk of bloom.

Q: Will this satinwood paint self-level without brush marks?

The long-oil resin in this oil-based satinwood paint provides excellent flow and levelling—use a quality synthetic brush and maintain a wet edge for the best satinwood finish.

Q: Is the satinwood paint suitable for radiators?

Yes—this interior satinwood paint is heat-resistant up to 90 °C once fully cured; allow 7 days before bringing radiators online.

Q: Can I spray oil-based satinwood paint?

Absolutely—HVLP 1.8 mm or airless 0.013–0.015″ tip spray recommended. Thin with up to 10 % white spirit if needed for spray application.

Q: How do I achieve a super-smooth satinwood finish on doors?

Sand primer with P240, tack off, apply a mist coat, then denib with P320 before applying two flowing coats of satinwood paint—tip off lightly to avoid brush marks.

Q: Is sanding between coats of satinwood paint essential?

Sanding is recommended if more than 24 hours pass before recoating to ensure a mechanical key and smooth satinwood finish.

Q: Can I add a hardener or catalyst to accelerate the cure of satinwood paint?

No—this is a single-pack oil-based satinwood paint; adding hardeners may compromise film integrity and durability.

Q: How soon can I clean surfaces painted with oil-based satinwood paint?

Wait 7 days for full cure; clean gently using mild detergent and a soft cloth to preserve the satinwood finish.

Manufactured by Vintage Varnish

Why Choose Our Products?

Transparent PU varnish resin resists scratches & household chemicals

UV blockers minimise yellowing & colour fade

Easy brush roll or spray application – flows to a mirror gloss

Low odour for interior projects touch-dry in 6–8 h

Supplied in contractor-friendly 5 L 10 L & 20 L tins

Vintage Varnish Clear Polyurethane Varnish is a single-pack, solvent-borne clear PU varnish formulated to deliver a crystal-clear, durable gloss on bare or previously varnished timber. The long-oil polyurethane penetrates and bonds tenaciously, forming a flexible yet abrasion-resistant film ideal for doors, windows, skirting, furniture tops, and hardwood floors.

Advanced UV absorbers lock in colour and clarity, preventing the ambering associated with traditional oil varnishes, while the low-odour solvent system makes indoor application more pleasant. The varnish self-levels beautifully when brushed, eliminating drag marks and leaving a deep, glass-like finish that highlights the natural grain.

Manufactured in the UK under ISO 9001, Vintage Varnish comes ready for use; simply stir and apply two to three coats for long-lasting protection and showroom gloss.

Ideal Uses

Interior doors
Window frames
Skirting boards
Dresser tops
Stair handrails
Hardwood flooring
Bar and counter tops
Musical instruments (test first

Sizes & Coverage

Pack Size	Typical Coverage (2 coats)
5 L	≈ 30 m²
10 L	≈ 60 m²
20 L	≈ 120 m²

Coverage approx. 6–8 m² / L / coat on planed hardwood; porous softwoods will absorb more.

Finish

High-gloss, crystal clear.

Drying & Recoat @ 18 °C

Touch dry 6–8 h • Recoat 12 h • Light use 24 h • Full cure 7 days.

Storage & Clean-Up

Store 5–30 °C out of direct sun. Reseal firmly. Clean tools with white spirit while wet.

Preparation

Sand to fresh wood (P180–P240)
Remove dust, grease & loose old varnish
Wood moisture ≤ 15 %

First Coat

Thin 10% white spirit for bare timber; apply with a high-quality natural-bristle brush following the grain.

Denib

After 12 h, sand lightly with P320 abrasive; wipe clean.

Build Coats

Apply 1–2 full-viscosity coats. Maintain a wet edge to avoid lap lines.

Extra Durability

Floors or worktops may receive a fourth coat after 24 h for maximum film build.

Avoid application below 10 °C, in high humidity or direct intense sunlight.

Property	Value
Components	1-part ready-to-use
Base	Polyurethane alkyd
Finish	High gloss clear
Recommended coats	2–3 interior • 3–4 floors/worktops
Wet film thickness	≈ 90 µm (≈ 40 µm DFT)
Coverage	6–8 m² / L / coat
Touch dry	6–8 h @ 18 °C
Recoat window	12 h
Full cure	7 days

Property	Value
Application tools	Brush, foam roller, HVLP spray
Clean-up	White spirit
Shelf life	24 months unopened
Pack sizes	5 L, 10 L, 20 L
Interior / exterior	Interior (sheltered exterior trim)
UV inhibitors	Yes
VOC	< 450 g/L
Primer required	Self-priming on timber; seal end-grain first

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

Does the oil-based satinwood paint yellow over time?

All alkyd enamels amber slightly; Magnolia camouflages this best. Regular daylight slows the yellowing of the satinwood finish.

Can I apply oil-based satinwood paint over a water-based undercoat?

Yes—ensure the water-based undercoat is fully cured (24 h) and lightly sanded to create a proper key for the satinwood paint.

What is the minimum temperature for applying satinwood paint?

10 °C; cooler temperatures slow the cure of the durable satinwood paint and increase the risk of bloom.

Will this satinwood paint self-level without brush marks?

The long-oil resin in this oil-based satinwood paint provides excellent flow and levelling—use a quality synthetic brush and maintain a wet edge for the best satinwood finish.

Is the satinwood paint suitable for radiators?

Yes—this interior satinwood paint is heat-resistant up to 90 °C once fully cured; allow 7 days before bringing radiators online.

Can I spray oil-based satinwood paint?

Absolutely—HVLP 1.8 mm or airless 0.013–0.015″ tip spray recommended. Thin with up to 10 % white spirit if needed for spray application.

How do I achieve a super-smooth satinwood finish on doors?

Sand primer with P240, tack off, apply a mist coat, then denib with P320 before applying two flowing coats of satinwood paint—tip off lightly to avoid brush marks.

Is sanding between coats of satinwood paint essential?

Sanding is recommended if more than 24 hours pass before recoating to ensure a mechanical key and smooth satinwood finish.

Can I add a hardener or catalyst to accelerate the cure of satinwood paint?

No—this is a single-pack oil-based satinwood paint; adding hardeners may compromise film integrity and durability.

How soon can I clean surfaces painted with oil-based satinwood paint?

Wait 7 days for full cure; clean gently using mild detergent and a soft cloth to preserve the satinwood finish.

Select Variant and Order

£139.99 (inc VAT)

Tax included Shipping calculated at checkout.

Our Experts Recommended

Express Delivery Available!

Size

20 Litres 10 Litres 5 Litres

Product variants

*subject to stock levels at the time of your order.