Paintmaster Acrylic Tarmac Paint & Sealer for Driveways Coatings 20.0 kg
Why Choose Our Products?

Water-based low-odour acrylic tarmac paint formulation – easy soap-and-water clean-up

Four stock colours: Black Red Charcoal Mid Grey for driveway resurfacing

Anti-Slip variant pre-mixed with silica grit for extra grip on slopes ramps & outdoor surfaces

Touch-dry in 3 – 4 hours; light foot traffic after 12 hours

Breathable film reduces surface fretting and prolongs driveway life

Brush or roller application – no specialist tools required
Paintmaster Acrylic Tarmac Paint & Sealer is a single-pack, water-based acrylic driveway coating formulated to restore colour, seal, and protect tired tarmacadam, asphalt, and suitably prepared porous concrete.
The breathable resin locks down loose aggregate and helps prevent fretting and raveling while forming a durable, weather-resistant barrier that repels rainwater, oil drips, and everyday dirt. Unlike solvent systems, this low-odour acrylic is easy to apply, quick to recoat, and cleans up with water to make it ideal for domestic driveways, paths, car-park bays, and forecourts.
Two factory options cover most use cases:
-
Normal: a smooth satin finish that refreshes colour and leaves a smart, easy-clean surface for standard residential drives.
-
Anti-Slip: the same advanced acrylic, pre-charged with fine silica to create a subtle, micro-textured satin that improves grip in wet conditions without feeling harsh underfoot, perfect for slopes, entrances, and high-footfall routes.
Manufactured in the UK under ISO 9001 quality controls and supplied in 5 L, 10 L, and 20 L tins, Paintmaster Acrylic Tarmac Paint & Sealer supports projects of all sizes from quick DIY driveway refreshes to trade-scale car-park refurbishments.
Applied in two thin coats, it delivers a uniform, colour-true finish with strong adhesion to asphalt and porous concrete, helping reduce dusting and day-to-day maintenance.
Suitable Substrates:
-
Tarmac/tarmacadam/asphalt (sound, clean, and dry)
-
Porous concrete (etch or prime with Paintmaster Concrete Primer if dense or power-floated)
Not suitable for polished/non-porous concrete, previously sealed surfaces that remain water-repellent, or areas with standing water. Always complete a small test patch first.
Available Colours:
Black • Red • Charcoal • Mid Grey
Custom colours: BS 4800 / RAL shades available on bulk orders ≥ 100 L for branding or bay marking.
Coverage & Spread Rate:
-
Typical spread: ≈ 6 m² per litre per coat on driveway-grade tarmac (surface profile and porosity affect coverage).
-
Apply two thin coats at right angles for best uniformity, colour depth, and durability.
Drying & Curing Times (@ 18 °C):
-
Touch dry: 3–4 hours
-
Recoat: 4–6 hours
-
Light foot traffic: 12 hours
-
Vehicle traffic: 48 hours
-
Full cure: 7 days
Keep freshly coated areas dry for at least 6 hours after application; cool or damp conditions extend drying.
Finish & Sheen:
-
Normal: Smooth satin
-
Anti-Slip: Textured satin with pre-blended fine silica for discreet traction
5 L • 10 L • 20 L
Storage & Clean-Up:
-
Store sealed between 5–30 °C, frost-free, and out of direct sun.
-
Clean tools with warm, soapy water immediately after use.
-
Thinning: Ready to use; if spraying, thin with up to 5% clean water (excess thinning reduces film build).
For large areas, order the total requirement in one batch to ensure shade consistency across the job.
Safety Notice:
Apply outdoors or in well-ventilated areas. Avoid contact with eyes and prolonged skin exposure; wear gloves and eye protection. Keep away from children and pets until fully dry. Do not apply if rain is forecast within 24 hours. Dispose of waste according to local regulations. Refer to the Safety Data Sheet (SDS) for full guidance.
Property | Value |
---|---|
Components | 1-part, ready-mixed |
Base | Premium acrylic resin (water-based) |
Finish | Satin (Normal) • Textured satin (Anti-Slip) |
Colours | Black, Red, Charcoal, Mid Grey |
Recommended coats | 2 |
Coverage | 6 – 8 m² / L / coat |
Touch dry | 3 – 4 h @ 18 °C |
Recoat window | 4 – 6 h |
Light traffic | 12 h |
Property | Value |
---|---|
Vehicle traffic | 48 h |
Full cure | 7 days |
Application tools | Brush, roller (spray not advised due to viscosity) |
Clean-up | Warm soapy water |
Shelf life | 24 months sealed, frost-free |
VOC | < 60 g/L |
Primer required | None on sound tarmac; prime dense concrete |
Frequently Asked Questions
Select Variant and Order
Delivery within 24 to 48 hours
Paintmaster Acrylic Tarmac Paint & Sealer for Driveways Coatings - 20 Litres / Charcoal / Normal is backordered and will ship as soon as it is back in stock.
