Vintage Varnish Clear Polyurethane Varnish – Interior Gloss 20.0 kg

Q: Can this varnish be used on hardwood floors?

Yes, Vintage Varnish Clear Polyurethane Varnish is ideal for hardwood floors when applied in multiple coats, with a fourth coat recommended for maximum durability and scratch resistance.

Q: Will the varnish change the natural colour of the wood?

No, this clear polyurethane varnish contains advanced UV absorbers that prevent yellowing or ambering, preserving the natural colour and grain.

Q: Is it suitable for previously varnished surfaces?

Yes, as long as the existing varnish is sound, lightly sand the surface to provide a key before applying for a seamless finish.

Q: How many coats are recommended for interior woodwork?

Two to three coats provide excellent protection and gloss, while high-wear areas like floors or worktops benefit from a fourth coat.

Q: What is the drying time between coats?

At 18 °C, it is touch-dry in 6–8 hours and recoatable after 12 hours, with a full chemical cure in 7 days.

Q: Can I use this varnish outdoors?

No, it is designed for interior use only. For exterior timber, use a dedicated outdoor varnish with added weatherproofing.

Q: Do I need to thin the first coat?

Yes, thin the first coat up to 10% with white spirit on bare timber for better penetration and adhesion.

Q: Is sanding required between coats?

Yes, lightly sand with P320 abrasive between coats to ensure a smooth finish and strong adhesion.

Q: How should I clean brushes after use?

Clean brushes and tools immediately with white spirit to prevent hardening.

Q: What is the coverage per litre?

Each litre covers 6–8 m² per coat on planed hardwood, with higher absorption on softwoods.

Manufactured by Vintage Varnish

Why Choose Our Products?

Transparent PU varnish resin resists scratches & household chemicals

UV blockers minimise yellowing & colour fade

Easy brush roll or spray application – flows to a mirror gloss

Low odour for interior projects touch-dry in 6–8 h

Supplied in contractor-friendly 5 L 10 L & 20 L tins

Vintage Varnish Clear Polyurethane Varnish is a premium single-pack, solvent-borne varnish designed to give interior wood a crystal-clear, high-gloss finish with long-lasting protection. Formulated with advanced long-oil polyurethane resins, it penetrates deep into bare or previously coated timber, creating a flexible, abrasion-resistant film that stands up to everyday wear and tear.

This professional-grade clear varnish highlights the natural grain of wood, leaving a deep, glass-like gloss that resists scratches, spills, and scuffs. Integrated UV absorbers help prevent yellowing or ambering over time, maintaining a clean and contemporary look far beyond what traditional oil-based varnishes provide.

Thanks to its self-levelling properties, Vintage Varnish brushes on smoothly without drag marks, making it easy to achieve a flawless, showroom-quality finish. The low-odour solvent formula ensures comfortable indoor application while still delivering the strength and durability expected from a trade-quality polyurethane coating.

Manufactured in the UK under strict ISO 9001 quality standards, this varnish is supplied ready to use in 5 L, 10 L, and 20 L tins, supporting projects from small furniture restoration to large-scale commercial joinery. Whether you are refinishing doors, windows, floors, or bar tops, Vintage Varnish provides exceptional clarity, colour retention, and long-term protection.

Ideal Uses:

Interior doors and window frames
Skirting boards and stair handrails
Hardwood and softwood floors
Furniture tops, dressers, and tables
Bar and counter surfaces
Musical instruments (always test a small area first)

Sizes & Coverage:

5 L: approx. 30 m² (two coats)
10 L: approx. 60 m² (two coats)
20 L: approx. 120 m² (two coats)

Typical coverage is 6–8 m² per litre per coat on planed hardwood. Porous softwoods may absorb more material.

Finish:

High-gloss, crystal clear film that enhances natural grain and resists ambering.

Drying & Recoat Times @18 °C:

Touch Dry: 6–8 hours
Recoat: 12 hours
Light Use: 24 hours
Full Cure: 7 days

Storage & Clean-Up:

Store between 5–30 °C, away from direct sunlight and heat sources. Reseal tins tightly after use. Clean brushes and tools with white spirit while the varnish is still wet.

Surface Preparation:

Ensure the wood is clean, dry, and free from grease, wax, or old flaking coatings. Sand to fresh timber using P180–P240 grit to create a smooth, even surface. Remove all sanding dust and check that the wood moisture content is no more than 15% before application.

First Coat:

For bare wood, thin the varnish by up to 10% with white spirit to aid penetration and adhesion. Apply evenly with a high-quality natural-bristle brush, working along the direction of the grain for a smooth, consistent finish.

Denibbing Between Coats:

Allow the first coat to dry for approximately 12 hours. Lightly sand with P320 abrasive to remove any raised grain and improve adhesion. Wipe away all dust before applying further coats.

Build Coats:

Apply one to two full-viscosity coats to achieve a deep, protective gloss. Maintain a wet edge throughout the application to avoid lap lines or streaks.

Extra Durability:

For floors, worktops, or high-traffic surfaces, a fourth coat can be applied after 24 hours to increase film build and maximise resistance to wear and scratching.

Application Conditions:

Avoid applying below 10 °C, in high humidity, or in direct intense sunlight. Ensure good ventilation throughout the drying period to achieve an even, crystal-clear finish.

Property	Value
Components	1-part ready-to-use
Base	Polyurethane alkyd
Finish	High gloss clear
Recommended coats	2–3 interior • 3–4 floors/worktops
Wet film thickness	≈ 90 µm (≈ 40 µm DFT)
Coverage	6–8 m² / L / coat
Touch dry	6–8 h @ 18 °C
Recoat window	12 h
Full cure	7 days

Property	Value
Application tools	Brush, foam roller, HVLP spray
Clean-up	White spirit
Shelf life	24 months unopened
Pack sizes	5 L, 10 L, 20 L
Interior / exterior	Interior (sheltered exterior trim)
UV inhibitors	Yes
VOC	< 450 g/L
Primer required	Self-priming on timber; seal end-grain first

COVERAGE CALCULATOR

MEASURE YOUR DIMENSIONS

Do you know the area?

Yes No

Number of coats:

Frequently Asked Questions

Can this varnish be used on hardwood floors?

Yes, Vintage Varnish Clear Polyurethane Varnish is ideal for hardwood floors when applied in multiple coats, with a fourth coat recommended for maximum durability and scratch resistance.

Will the varnish change the natural colour of the wood?

No, this clear polyurethane varnish contains advanced UV absorbers that prevent yellowing or ambering, preserving the natural colour and grain.

Is it suitable for previously varnished surfaces?

Yes, as long as the existing varnish is sound, lightly sand the surface to provide a key before applying for a seamless finish.

How many coats are recommended for interior woodwork?

Two to three coats provide excellent protection and gloss, while high-wear areas like floors or worktops benefit from a fourth coat.

What is the drying time between coats?

At 18 °C, it is touch-dry in 6–8 hours and recoatable after 12 hours, with a full chemical cure in 7 days.

Can I use this varnish outdoors?

No, it is designed for interior use only. For exterior timber, use a dedicated outdoor varnish with added weatherproofing.

Do I need to thin the first coat?

Yes, thin the first coat up to 10% with white spirit on bare timber for better penetration and adhesion.

Is sanding required between coats?

Yes, lightly sand with P320 abrasive between coats to ensure a smooth finish and strong adhesion.

How should I clean brushes after use?

Clean brushes and tools immediately with white spirit to prevent hardening.

What is the coverage per litre?

Each litre covers 6–8 m² per coat on planed hardwood, with higher absorption on softwoods.

Can I use this varnish on furniture tops and bar counters?

Yes, it provides a hard-wearing, water-resistant finish ideal for tables, counters, and high-contact wood surfaces.

Select Variant and Order

£144.99 (inc VAT)

Tax included Shipping calculated at checkout.

Our Experts Recommended

Delivery within 24 to 48 hours

Size

20 Litres 10 Litres 5 Litres 1 Litre

Product variants

*subject to stock levels at the time of your order.