Extreme Paints Quick‑Drying Concrete Floor & Patio Paint + Sealer 20.0 kg

Extreme Paints Quick‑Drying Concrete Floor & Patio Paint + Sealer is a single‑component, low odour acrylic engineered to protect and beautify concrete floors and patios. Premium resins lock in rich colour while resisting tyre marks, oil drips, salt, and mild chemicals. A choice of smooth satin or integrated anti‑slip grit lets you tailor the surface to showrooms, garages, workshops, ramps or pool surrounds.

This concrete patio sealer is formulated and manufactured in the UK under ISO 9001 quality controls. This coating delivers excellent colour retention and long‑term durability even on sun‑exposed slabs with fast drying concrete paint. The breathable film blocks dusting yet allows trapped substrate moisture to escape, reducing the risk of blistering. Ideal substrates include concrete slabs, screeds, block paving and well‑bonded paint. Not recommended for asphalt or surfaces with protruding natural stone.

Safety is paramount, and with its slip-resistant floor sealer feature, you can ensure that treated surfaces are safer for foot traffic. The heavy-duty concrete paint formulation guarantees durability, even in high-traffic areas.

Colours Available

Light Grey • Mid Grey • Dark Grey • Rustic Red • Light Blue • Mid Blue • Dark Blue • Mid Green • Dark Green • Black • White • Sandstone • Terracotta • Brown

Spreading Rate (Coverage)

Approximately 6–8 m² per litre per coat, depending on porosity.

Storage

Store indoors between 5 °C and 30 °C away from direct heat and frost. Reseal firmly between uses to prevent skinning.

Thinning

Ready for use. For spray work up to 5 % clean water may be added. Excessive thinning will reduce film build.

Batch Consistency

Order total requirements in one transaction to ensure colour consistency. Separate production dates may vary slightly in shade.

Disclaimer: In periods of high demand, your order may arrive in a plain white tin with the correct product label applied. This does not affect quality or volume.

Application

Surface Preparation
Remove grease, dust, moss, and any loose or flaking paint from the concrete surface. Substrates must be dry with a moisture content below 15%. Power‑floated or polished concrete should be lightly etched or mechanically abraded to promote key and ensure optimal adhesion of quick-drying concrete floor paint and sealer.

Priming Bare Concrete
Apply one coat of Extreme Seal Concrete Dust Proofer & Primer to porous or uncoated concrete surfaces. This concrete primer enhances penetration, anchors the topcoat, and minimises suction — essential for high-performance industrial concrete paint systems.

Mixing
Stir thoroughly with a paddle mixer for two minutes, ensuring any anti-slip silica grit is evenly dispersed throughout the concrete patio paint solution.

Application Method
Use a brush, medium‑nap roller, or airless / HVLP sprayer (smooth finish only). Apply two thin, even coats of this quick-drying concrete patio paint at right angles, allowing 2–4 hours between coats at 18°C.

Curing Schedule
Allow light foot traffic after 12 hours, vehicle traffic after 48 hours, and full chemical resistance after 7 days. Lower temperatures may increase drying time for the patio and driveway sealer.

Below are the technical specifications of this coating. For any additional data or in‑depth advice, please email support@tradesuppliesuk.co.uk or call our technical helpline on 07929 525648; a specialist will gladly assist.