Extreme Clean Alloy Wheel & Tyre Cleaner 5.0 kg

Achieving a spotless finish on your vehicle's wheels and tyres requires the right approach. We created this application guide to help you get the best possible results with our powerful, non-corrosive formula. Follow these steps to safely and effectively strip away stubborn brake dust and road grime.

Where to Use

Extreme Clean Alloy Wheel & Tyre Cleaner is ideal for:

• Alloy wheels (painted, polished, chrome, and standard steel)
• Rubber tyre walls
• Suitable for use on most car and van wheel types, including those with delicate finishes

Avoid using uncoated aluminium or aftermarket finishes without spot-testing first.

Safety Precautions Before You Begin

• Check the temperature: Always ensure your wheels and tyres are entirely cool to the touch before applying the product. Hot surfaces can cause the cleaner to dry too fast.
• Pick the right spot: Work in a shaded area away from direct sunlight.
• Protect yourself: Wear detailing gloves to keep your hands free from heavy dirt and cleaning agents.

Step-by-Step Instructions

Step 1: Perform an Initial Rinse
Start by spraying your wheel and tyre with a strong stream of water. This knocks loose heavy, surface-level dirt and cools the area down.

Step 2: Apply the Cleaner
Spray the Extreme Clean Alloy Wheel & Tyre Cleaner directly onto the wheel face, the inner barrel, and the rubber tyre wall. Ensure you coat the entire surface evenly.

Step 3: Let the Formula Work
Allow the cleaner to sit on the surface for 1 to 2 minutes. During this brief dwell time, the fast-acting agents will break down baked-on brake dust and old tyre oils. Never let the product dry on the wheel or tyre.

Step 4: Agitate the Grime
Because this formula requires minimal rubbing, light dirt will lift right off. However, if you are dealing with heavy buildup, gently agitate the surface. Use a soft-bristled detailing brush on your alloy finishes and a stiffer brush on the tyre wall to pull deep dirt out of the rubber pores.

Step 5: Rinse Thoroughly
Rinse the wheel and tyre completely with plenty of clean water. Make sure you wash away all the cleaner and the lifted contaminants, leaving nothing but a fresh, restored surface behind.

Coverage Rates

• One 5-litre container covers approximately 15–20 full vehicle wheel/tyre sets, depending on wheel/tyre size and amount of grime.
• Actual coverage may vary based on application technique and condition of the wheels and tyres.

Drying & Safety

• After rinsing, use a clean microfiber towel to dry wheels and tyres immediately. This prevents water spots and streaks on your freshly cleaned surfaces.
• Store the product in a cool, dry place away from direct sunlight and out of reach of children.
• Avoid prolonged contact with skin and always wash hands thoroughly after use.

Tips for the Best Results

• Work one wheel at a time: Focus your attention on a single wheel and tyre from start to finish. This prevents the formula from drying on the other wheels before you have a chance to rinse them.
• Dry immediately: Use a clean, dedicated microfiber towel to dry your wheels right after washing. This stops hard water spots from forming on your clean alloy finishes.

Maintain a regular schedule: Use the cleaner during your routine washes to stop brake dust from building up. Frequent care extends the life of your wheels and makes every future wash much faster.