By Extreme Paints

Extreme Paints Quick‑Drying Concrete Floor & Patio Paint + Sealer

£44.99 - £139.99
Tax included. Shipping calculated at checkout.
Colour: Dark Grey
Size: 5 Litres
Material: Anti Slip
Regular price £54.99
Regular price Sale price £54.99
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Coverage Calculator

Measure your dimensions

Regular price £54.99
Regular price Sale price £54.99

Extreme Paints Quick‑Drying Concrete Floor & Patio Paint + Sealer is a single‑component, low odour acrylic engineered to protect and beautify interior or exterior concrete. Premium resins lock in rich colour while resisting tyre marks, oil drips, salt and mild chemicals. A choice of smooth satin or integrated anti‑slip grit lets you tailor the surface to showrooms, garages, workshops, ramps or pool surrounds.

Formulated and manufactured in the UK under ISO 9001 quality controls, this coating delivers excellent colour retention and long‑term durability even on sun‑exposed slabs. The breathable film blocks dusting yet allows trapped substrate moisture to escape, reducing the risk of blistering. Ideal substrates include concrete slabs, screeds, block paving and well‑bonded paint. Not recommended for asphalt or surfaces with protruding natural stone.

Colours Available

Light Grey • Mid Grey • Dark Grey • Rustic Red • Light Blue • Mid Blue • Dark Blue • Mid Green • Dark Green • Black • White • Sandstone • Terracotta • Brown

Spreading Rate (Coverage)

Approximately 6–8 m² per litre per coat depending on porosity.

Storage

Store indoors between 5 °C and 30 °C away from direct heat and frost. Reseal firmly between uses to prevent skinning.

Thinning

Ready for use. For spray work up to 5 % clean water may be added. Excessive thinning will reduce film build.

Batch Consistency

Order total requirements in one transaction to ensure colour consistency. Separate production dates may vary slightly in shade.

Disclaimer: In periods of high demand, your order may arrive in a plain white tin with the correct product label applied. This does not affect quality or volume.

 

Property Details
ComponentsSingle pack
BaseWater borne acrylic
FinishSatin smooth or satin textured anti-slip
Recommended coats2
Wet film thickness100 µm (≈ 50 µm DFT)
Coverage6–8 m² per L per coat
Touch dry2–4 h @ 18 °C
Recoat window2–4 h @ 18 °C
Full cure7 days
Property Details
Application toolsBrush, roller, airless sprayer, HVLP (smooth finish)
Clean-upWarm soapy water
Shelf life24 months unopened
Pack sizes5 L, 10 L, 20 L
Colour options14 standard colours (Light Grey, Mid Grey, Dark Grey, Rustic Red, Light Blue, Mid Blue, Dark Blue, Mid Green, Dark Green, Black, White, Sandstone, Terracotta, Brown)
Interior / exteriorBoth
Suitable substratesConcrete, screed, block paving, wood, well-bonded coatings
VOC< 30 g /L
  1. Surface Preparation Remove grease, dust, moss and any loose or flaking paint. Substrates must be dry with a moisture content below 15 %. Power‑floated or polished concrete should be lightly etched or mechanically abraded to promote key.
  2. Priming Bare Concrete Apply one coat of Extreme Seal Concrete Dust Proofer & Primer to porous or uncoated concrete. This penetrating primer anchors the topcoat and minimises suction.
  3. Mixing Stir with a paddle mixer for two minutes ensuring any silica grit is evenly dispersed.
  4. Application Method Brush, medium‑nap roller or airless / HVLP sprayer (smooth finish only). Apply two thin, even coats at right angles allowing 2–4 h between coats at 18 °C.
  5. Curing Schedule Light foot traffic after 12 h, vehicle traffic after 48 h, full chemical resistance after 7 days. Lower temperatures will extend drying times.

Below are the technical specifications of this coating. For any additional data or in‑depth advice, please email support@tradesuppliesul.co.uk or call our technical helpline on 07929 525648 and a specialist will be happy to assist.